CommentStreams:C1606126f5271570bb585d9a879883c7

I'm using the X1203, and when it's connected to power, it occasionally goes into low power mode and shuts down automatically. The note says the voltage range must be 3.00~4.10 VDC. I'm wondering if it's okay to set it to a lower voltage, like 2.8V. I'm not using a battery — it's powered directly with a 12V 3A adapter.

Voltage: 4.20V Battery: 15% Battery Low

Voltage: 4.20V Battery: 15% Battery Low

Voltage: 4.20V Battery: 16% Battery Low

Voltage: 4.20V Battery: 16% Battery Low

Voltage: 4.20V Battery: 16% Battery Low

Voltage: 4.20V Battery: 16% Battery Low

Voltage: 4.20V Battery: 16% Battery Low

Voltage: 2.91V Battery: 16% Battery Low Battery LOW!!! Shutdown in 5 seconds nohup: ignoring input and appending output to 'nohup.out'

Broadcast message from root@rachel (Tue 2025-04-08 06:27:25 PDT):

The system will power off now!

Broadcast message from root@rachel (Tue 2025-04-08 06:27:25 PDT):

The system will power off now!