9-Layer Case

9-layer acrylic case for raspberry pi 4 model b

Overview

This is a 9 layers acrylic case designed specifically for the Raspberry Pi 4 Model B only, NOT for 3B+/3B;

It provides the best available protection/accessibility for the Raspberry Pi 4 Model B;

There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don't need to open the case.

Reserved ranked line hole for the camera, more convenient to use.

Cooling Fan specifications

Rated voltage: DC5V;
Working voltage :3.0~5 .8 V;
Current: 0.1A;
Air volume: 5 m3 / h;
Rpm: 13200RPM;
Noise: 18dB
cable length: 6cm

Installation Guide

Packing List

1 x Acrylic Case
1 x Cooling Fan

Note:

1. The raspberry pi 4 model B mother board is not included in the packing list.

2. When install the cooling fan, it not support to use heatsink since the height is not enough. The heat dissipation is good enough when only use the cooling fan.

Document

Enable comment auto-refresher