Open main menu

3.5 inch TFT LCD Touch Screen SKU:363295

3.5 inch TFT LCD Touch Screen with acrylic case

3.5 inch TFT LCD Touch Screen SKU:363295
3.5 inch TFT LCD Touch Screen SKU:363295

Contents

Introduction

Raspberry pi 3.5 inch TFT Touch Screen Display Shield Module for Raspberry Pi 3 Model B /2B/ B+ / B (320 x 480)


Features

  • Designed for Raspberry Pi, easy to use
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Driver provided (works with custom Raspbian directly)
  • Supports Raspbian system, enables your system to:
  • Play videos (supports multi formats, MP4 and so on)
  • Take photos by touching (up to 17 camera modes)
  • Support software keyboard (system interaction without keyboard/mouse)
  • High quality immersion gold surface plating

Key Parameters

LCD Type TFT
LCD Interface SPI
Touch Screen Type Resistive
Touch Screen Controller XPT2046
Colors 65536
Backlight LED
Resolution 320*240 (Pixel)
Aspect Ratio 4:3
SPI Diver Speed 48Mhz
Backlight Current TBD
Operating Temp. (℃) TBD

Interface

PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 22 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
16 KEY2 KEY
18 KEY3 KEY
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active

How to use the LCD

Document & Download

Packing List

  • 1 x TFT Module
  • 1 x Touch Pen

Acrylic Case

 Acrylic Case

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.