2,917
edits
Changes
H500
,{{GD Template Impl}}
[[File:H500-PI-5B 20231010101641.jpg|thumb|right|Rasperry Pi 5 official Active cooler]]
[[File:H500-IMG-6448-1.jpg|thumb|right|Rasperry Pi 5 official Active cooler]]
==Overview==
This is the Raspberry Pi Official Active Cooler for Raspberry Pi 5.
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
<pre>
WARNINGS
• This product should only be used with Raspberry Pi 5.
• This product should only be operated in a well ventilated environment, and if used with a case, the case should not be covered.
• Make sure the metal heatsink does not touch any electronic components on Raspberry Pi 5 or any accessories, to avoid the risk of unwanted electrical contact and shorting.
• Ensure the thermal pads are present and undamaged before use. If the pads are missing or damaged, you will need to replace them before using the Active Cooler.
• Take care when using the Active Cooler, as the metal parts of the product may become hot during operation.
• Avoid removing the Active Cooler once it is fitted to Raspberry Pi 5, as this product is not designed for repeated removal and replacement.
</pre>
{{Geekworm Cooler}}
==Features==
* Single-piece anodised aluminium heatsink
* Heatsink-mounted, temperature-controlled blower fan attached by three screws
* Spring-loaded push pins for mounting onto Raspberry Pi 5
* Pre-applied thermal pads for heat transfer
==Specifications==
* Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5
* Fan speed control: Pulse width modulation control with tachometer
* Maximum airflow: 1.09 CFM
* Maximum fan speed: 8000 RPM +/- 15%
* Product material: Anodised aluminium
* Pinout: The fan connector is a 1mm pitch JST SH socket and has four pins:
{| class="wikitable"
! Pin !! Function
|-
| 1 || +5V
|-
| 2 || PWM
|-
| 3 || GND
|-
| 4 || Tach
|}
==Compatibility==
Compatible with [[P394]], [[P395]] etc.
==Documents==
* [https://datasheets.raspberrypi.com/cooling/raspberry-pi-active-cooler-product-brief.pdf?_gl=1*mgfu34*_ga*NTU0MjY2OTgyLjE3MDA3OTkzMzQ.*_ga_22FD70LWDS*MTcwMDgxNTMxMy4yLjEuMTcwMDgxNTMzNi4wLjAuMA.. Raspberry Pi Active Cooler product brief]
* [https://datasheets.raspberrypi.com/cooling/raspberry-pi-active-cooler-mechanical-drawing.pdf?_gl=1*mgfu34*_ga*NTU0MjY2OTgyLjE3MDA3OTkzMzQ.*_ga_22FD70LWDS*MTcwMDgxNTMxMy4yLjEuMTcwMDgxNTMzNi4wLjAuMA.. Raspberry Pi Active Cooler mechanical drawing]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]
[[File:H500-PI-5B 20231010101641.jpg|thumb|right|Rasperry Pi 5 official Active cooler]]
[[File:H500-IMG-6448-1.jpg|thumb|right|Rasperry Pi 5 official Active cooler]]
==Overview==
This is the Raspberry Pi Official Active Cooler for Raspberry Pi 5.
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
<pre>
WARNINGS
• This product should only be used with Raspberry Pi 5.
• This product should only be operated in a well ventilated environment, and if used with a case, the case should not be covered.
• Make sure the metal heatsink does not touch any electronic components on Raspberry Pi 5 or any accessories, to avoid the risk of unwanted electrical contact and shorting.
• Ensure the thermal pads are present and undamaged before use. If the pads are missing or damaged, you will need to replace them before using the Active Cooler.
• Take care when using the Active Cooler, as the metal parts of the product may become hot during operation.
• Avoid removing the Active Cooler once it is fitted to Raspberry Pi 5, as this product is not designed for repeated removal and replacement.
</pre>
{{Geekworm Cooler}}
==Features==
* Single-piece anodised aluminium heatsink
* Heatsink-mounted, temperature-controlled blower fan attached by three screws
* Spring-loaded push pins for mounting onto Raspberry Pi 5
* Pre-applied thermal pads for heat transfer
==Specifications==
* Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5
* Fan speed control: Pulse width modulation control with tachometer
* Maximum airflow: 1.09 CFM
* Maximum fan speed: 8000 RPM +/- 15%
* Product material: Anodised aluminium
* Pinout: The fan connector is a 1mm pitch JST SH socket and has four pins:
{| class="wikitable"
! Pin !! Function
|-
| 1 || +5V
|-
| 2 || PWM
|-
| 3 || GND
|-
| 4 || Tach
|}
==Compatibility==
Compatible with [[P394]], [[P395]] etc.
==Documents==
* [https://datasheets.raspberrypi.com/cooling/raspberry-pi-active-cooler-product-brief.pdf?_gl=1*mgfu34*_ga*NTU0MjY2OTgyLjE3MDA3OTkzMzQ.*_ga_22FD70LWDS*MTcwMDgxNTMxMy4yLjEuMTcwMDgxNTMzNi4wLjAuMA.. Raspberry Pi Active Cooler product brief]
* [https://datasheets.raspberrypi.com/cooling/raspberry-pi-active-cooler-mechanical-drawing.pdf?_gl=1*mgfu34*_ga*NTU0MjY2OTgyLjE3MDA3OTkzMzQ.*_ga_22FD70LWDS*MTcwMDgxNTMxMy4yLjEuMTcwMDgxNTMzNi4wLjAuMA.. Raspberry Pi Active Cooler mechanical drawing]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]