2,960
edits
Changes
X302
,no edit summary
{{GD Template Impl}}
[[File:X302-IMG-4003.jpg|thumb|right|X302 Dac Shield for Raspberry Pi zero 2 w]]
[[File:X302-IMG-3979.jpg|thumb|right|X302 Dac Shield for Raspberry Pi zero 2 w]]
[[File:X302-IMG-4004.jpg|thumb|right|X302 Dac Shield for Raspberry Pi zero 2 w]]
[[File:X302-PCB.png|thumb|right|X302 pcb size]]
==Overview==
The X302 HiFi DAC for Raspberry Pi zero 2w / zero w adds a high-quality sound to your Raspberry Pi. It is designed for optimal sound output quality and the ideal HiFi solution for all Raspberry Pi zero w/2w users that love music.
Onboard four USB2.0 ports for easy use of USB peripherals.
User can use X302 easily without cables needed.
Compatible with [[C296 | C296]] aluminum alloy heatsink, providing a cooling solution for your Raspberry Pi zero w /2w.
'''Note:'''
* NOT supports Raspberry Pi Zero as it without wifi module
* NOT supports Pi Zero WH as there are Pogo Pins under the GPIO header
* Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB
==Features==
* Ideal HiFi audio solution for Raspberry Pi Zero W & Zero 2W
* Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
* Full-HD audio – up to 24-bit/192kHz playback
* Dynamic range signal-to-noise ratio (SNR) up to 112dB, maximum distortion less than 0.0019%
* Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
* Built-in TI original high-quality headphone amplifier chip (TI TPA6133A)
* Uses the ultra-low-noise voltage regulator
* On-board RCA connectors - external audio equipment
* On-board 3.5mm stereo headphone jack - external headphones
* On-board four USB 2.0 Ports - No more external USB hub
* Gain 4 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
* Connects to the Raspberry Pi via Pogo Pins - no wiring & soldering required
* Compatible with [[C296 | C296]] heatsink
* Not compatible with Raspberry Pi Zero WH & 2WH (Zero with Headers)
* '''Support OS''': Moode Audio Player, OSMC, Openelec, Raspbian Jessie, Volumio, Max2Play, Ropiee
==Packing List==
* 1 x X302 DAC Shield
* 4 x KM2.5 x 5 screws
==User Manual==
* Please refer to [[X950 software]]
==FAQ==
Q: What is the power output of the X302 HiFi DAC HAT per speaker channel?
A: RCA: 2.1 VRMS (GND center)
<!--Add review function! -->
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:X302-IMG-4003.jpg|thumb|right|X302 Dac Shield for Raspberry Pi zero 2 w]]
[[File:X302-IMG-3979.jpg|thumb|right|X302 Dac Shield for Raspberry Pi zero 2 w]]
[[File:X302-IMG-4004.jpg|thumb|right|X302 Dac Shield for Raspberry Pi zero 2 w]]
[[File:X302-PCB.png|thumb|right|X302 pcb size]]
==Overview==
The X302 HiFi DAC for Raspberry Pi zero 2w / zero w adds a high-quality sound to your Raspberry Pi. It is designed for optimal sound output quality and the ideal HiFi solution for all Raspberry Pi zero w/2w users that love music.
Onboard four USB2.0 ports for easy use of USB peripherals.
User can use X302 easily without cables needed.
Compatible with [[C296 | C296]] aluminum alloy heatsink, providing a cooling solution for your Raspberry Pi zero w /2w.
'''Note:'''
* NOT supports Raspberry Pi Zero as it without wifi module
* NOT supports Pi Zero WH as there are Pogo Pins under the GPIO header
* Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB
==Features==
* Ideal HiFi audio solution for Raspberry Pi Zero W & Zero 2W
* Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
* Full-HD audio – up to 24-bit/192kHz playback
* Dynamic range signal-to-noise ratio (SNR) up to 112dB, maximum distortion less than 0.0019%
* Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
* Built-in TI original high-quality headphone amplifier chip (TI TPA6133A)
* Uses the ultra-low-noise voltage regulator
* On-board RCA connectors - external audio equipment
* On-board 3.5mm stereo headphone jack - external headphones
* On-board four USB 2.0 Ports - No more external USB hub
* Gain 4 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
* Connects to the Raspberry Pi via Pogo Pins - no wiring & soldering required
* Compatible with [[C296 | C296]] heatsink
* Not compatible with Raspberry Pi Zero WH & 2WH (Zero with Headers)
* '''Support OS''': Moode Audio Player, OSMC, Openelec, Raspbian Jessie, Volumio, Max2Play, Ropiee
==Packing List==
* 1 x X302 DAC Shield
* 4 x KM2.5 x 5 screws
==User Manual==
* Please refer to [[X950 software]]
==FAQ==
Q: What is the power output of the X302 HiFi DAC HAT per speaker channel?
A: RCA: 2.1 VRMS (GND center)
<!--Add review function! -->
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]