[[File:KVM01-X630-A3A8-IMG-44024966-main.jpg|thumb|right|X630+X630-A3+KVM-A3 Case for Pi4]][[File:X630-A3-IMG-42351.jpg|thumb|right|X630+X630PiKVM-A3A8]][[File:X630KVM-A3-IMG-4237.jpg|thumb|right|X630+X6304402-A3]][[File:X630-IMG-2718main.jpg|thumb|right|X630 HDMI to CSI-2 Module]][[File:X630-A3-V1.3-ACCE.jpg|thumb|right|X630-A3 V1.3 Packing List]][[File:X863PiKVM-A3-ACCE.jpg|thumb|right|X630-A3 V1.2 Packing List]][[File:X630-A4-Acc.jpg|thumb|right|X630-A4 Packing List]][[File:X630-A5-acc.jpg|thumb|right|X630-A5 Packing List]][[File:X630-A5a4-IMG-4210-2.jpg|thumb|right|X630-A5]][[File:X630-A8-IMG-4948.jpg|thumb|right|X630-A8-Front]][[File:X630-A8-IMG-4949.jpg|thumb|right|X630-A8-Rear]][[File:X630-A8-Standard-height-PCIe-bracket.jpg|thumb|right|X630-A8 Standard height PCIe Add-in Card I/O Bracket]][[File:X630+X630-A3+X630-A5+0.96寸OLED+Ethernet4552.jpg|thumb|right|PiKVM-A3: X630+X630-A3+X630-A5+OLED for Pi 4]][[File:X630+X630-A4+X630-A5+0.96OLED+Ethernet.jpg|thumb|right|PiKVM-A4: X630+X630-A4+X630-A5+OLED for Pi Zero 2 W / Zero W]][[File:01-X630-A8-acce.jpg|thumb|right|PiKVM-A8: X630+X630-A8 for Pi 4]]
[[File'''Geekworm KVM family products:Pi4-V3-HAT.png|800px]]'''
{| class="wikitable"
! Model !! Compatible with !! Work with X630 !! Remark
|-
| [[PiKVM-A3|KVM-A3]] || Raspberry Pi 4 Model B || YES ||
|-
| [[PiKVM-A8|KVM-A8]] || Raspberry Pi 4 Model B || YES || '''PCIe version''', No external wire
|-
| [[PiKVM-A4|KVM-A4]] || Raspberry Pi zero 2 W || YES ||
|-
| [[X650]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version'''
|-
| [[X652]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version''', PoE Power&NVMe SSD supported
|-
| [[X680]] || Raspberry Pi Compute Module 4 (CM4) || NO || '''Can control up to 4 USB HDMI computers/servers'''
|}
<!--
'''PS:''' PiKVM-A3 is also compatible with Raspberry Pi 3 B+ / 3B, but since Pi3 without OTG interface, when PiKVM-A3 is used with Pi3, OTG analog keyboard and mouse cannot be used.
-->
<span class="tb_red">'''QAbout after-sales service: How to enable RTC?'''</span>
A: Firstly, insert The after-sales service of all products sold by Geekworm should be the C1220 button battery.run the following command: rw sudo nano /boot/config.txt #Then change the lineresponsibility of our Geekworm team (email: '''dtoverlay=i2c-rtc,pcf8563''' to support@geekworm.com'''dtoverlay=i2c-rtc),ds1307''' #Test RTC #Display the current time of the Raspberry Pi date #Write please do not disturb the time of Raspberry Pi to DS1307 sudo hwclock official PiKVM after-w #Read the time of DS1307 sudo hwclock -r rosales team.
'''QSome Resource: Why PiKVM-A3/A4 does not show the video?'''* [https://docs.pikvm.org/ Official Document]* [https://docs.pikvm.org/faq/ Official FAQ]* [https://pikvm.org/download/ PiKVM OS download]
A:==References==* Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;* Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).* Your computer may have turned on sleep mode for the monitor. Move the mouse to turn it off.<references />