Overview
This is a 60FPS 3.5 inch TFT Touch Screen with 480*320 physical resolution for raspberry pi 4 model B, the blacklight can be adjusted or be turned off. Please note it only compatible with Raspberry Pi 4 Model B, NOT compatible with other raspberry pi version.
Features
Size: 3.5 inch
LCD Interface: DPI
Resolution: 480*320 (Pixel)
LCD Colors: 65K
Touch Screen Type: 4-wire resistive
Touch Screen Controller: XPT2046 SPI Interface
Refresh Rate: 60FPS
Backlight can be adjusted or be turned off;
Fan voltage and current: 5V 200ma
Packing List
1 x 3.5 inch TFT Touch Screen for raspberry pi 4 model b
Note:
1. The raspberry pi 4 model b is not including in the packing list.
2. The pin on the back of the LCD is not for customer to use, it is the interface for factory to programming and debugging.
Use Guide
FAQ
1. How to check and confirm if the screen is not working?
- To use this screen, first you need to add the screen driver into the config.txt. Please make sure you add it, thanks!
- You can also use the command: sudo raspi-gpio get to have a check.
- Please make sure the GPIO is set as DPI mode.
- You can use the "mzp354hv05tr-retropie-install.sh" to test the screen, this is easy to test.
Enable comment auto-refresher
Anonymous user #1
Permalink |
Anonymous user #1
Permalink |
Admin