Features
| For Use With | Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B |
| Operating System | - Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
- OSMC - Supports X4000 HDMI audio - Openelec - Supports X4000 HDMI audio - Raspbian Jessie - Supports X4000 HDMI audio - Rune audio - Supports X4000 HDMI audio - Pi Core Player - To be tested |
| Key Features | - High-quality ESS DAC for best sound quality
- Use the ESS Technology flagship DAC chipset (ES9018K2M) - 127dB DNR -120dB THD+N - Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP - Used the ultralow phase noise 100MHz HiFi TCXO - Used the Texas Instruments ultra-low-noise voltage regulator - Gold-plated RCA connectors - Supports up to 1TB 2.5-inch SATA hard drives - Selectable HDMI audio or Raspberry Pi i2S audio - Supports SPDIF Optical Digital Audio - Supports HDMI high-bit-rate (HBR) audio - High quality video performance - 3.5mm analog stereo jack output - Allows you to split the audio stream from a HDMI signal - No HDMI output connection is required to receive audio at the analog and optical outputs - Connects directly to the Raspberry Pi - no additional cables needed - Can be used individually with only 3 wire I2S signal connected from other i2s interface - Ultra-compact chassis - Powers the Raspberry Pi - no additional power supply - Lighted power switch - Raspberry Pi status LEDs still visible - Easy to change the Raspberry Pi OS SD card - No need to open the case - Easy DIY with Raspberry Pi |
| Power Supply Unit (Optional Accessories) | - AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU) |
| Specification | - Power supply: +5Vdc +/-5%
- Input Ports: 1 x HDMI - Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND) - Output Ports: 1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical - Analog audio output level: 2V RMS - Resolution/Sampling Rate: upto 32bit / 384KHz (ES9018K2M) -(1) upto 24bit / 192KHz (Raspberry Pi I2S) -(2) upto 24bit / 192KHz (Optical S/PDIF Audio) - Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH - Size 122mm x 90mm x 90mm |
| Notes | - For use with original power supply unit only
- WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. - Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed (The powerful HDMI audio processing chipset needs time to bootup) |
| Packing List | - X4000 Metal Case x 1
- X4000 Expansion Board Kit x 1 - X800K HDD Expansion Board Kit x 1 - Power Adapter 5V 4A x 1 - Metal case Accessories kit x 1 - Tool kit x 1 |
Hardware installation
Please refer to here: Hardware installation
Software Configuration
Please refer to here: Software Configuration
More details please refer to more detail
Enable comment auto-refresher