Overview
SupTronics X600 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+
FEATURES
Input Voltage:
- 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
Audio & Video:
- Allows you to extract audio signals from HDMI of your Raspberry Pi
- Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
- The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio
- Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack
- Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
- Maintains surround format when converting to digital optical audio
- Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input
- Supports HDMI signal amplification and equalization output for repeater function
- HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
SATA:
- Allows you to connect SATA devices to your Raspberry Pi
Wireless:
- Built in IR sensor (38KHz)
Misc:
- Power output socket
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring nor soldering is required
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
Dimensions:
- 85 x 56mm (Same size as Raspberry Pi)
Packing List
- 1 x Expansion board
- 1 x HDMI to VGA connector
- 1 x USB male to male connector
- 1 x Pack of install screws
Document
Official site: http://www.suptronics.com/Xseries/x600.html
Enable comment auto-refresher