CommentStreams:B5234914d5401c1cd6bf9e68e3bc906a

< CommentStreams:4c72fe503b63094636a12080dcb73a55
Revision as of 20:14, 24 December 2025 by Ruby (talk | contribs) (Migrated reply #6192)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Hi there! We checked with our tech support – could you please verify these configurations are set up correctly?

  • Baud rate: 115200
  • Data bits: 8
  • Parity: None
  • Stop bit: 1
  • Transmission mode: Text mode
  • No carriage return/line break after commands
  • UART TX → Board RX; UART RX → Board TX
  • Do NOT connect UART VCC

Let us know if you run into any issues!