Geekworm Wiki

CommentStreams:11339f1163c059eafac225f509f63c97

< X-C1 Software
Revision as of 04:10, 7 November 2021 by 178.213.207.99 (talk) (Migrated comment #2045)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

For future generations looking for software night mode indication: power button's LED is powered by 1.83 mA at 2.57 V, so you need a 400 ohm resistor to drive it directly from the 3.3V raspberry pin. Pin, marked in FAQ (linked below) is GND, the one to be cut off (and point to connect from gpio) is right above it.

Retrieved from "https://wiki.geekworm.com/index.php?title=CommentStreams:11339f1163c059eafac225f509f63c97&oldid=32106"