X15-POE1

Overview

The X15-POE1 is a Power over Ethernet (PoE) Head-At-Board (HAT) specifically designed for the Raspberry Pi Compute Module 5 (CM5), requiring use with either the X1500 or X1501 IO base boards. Compliant with the IEEE 802.3af/at (PoE+) standard, this board can draw up to 25.5W of power from a compatible PoE switch via a single Cat5e/Cat6 Ethernet cable, simultaneously providing stable operational power and network connectivity for the CM5.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This design eliminates reliance on external power supplies, simplifies system integration, and reduces cable clutter.

Features

Standard Compliance: IEEE 802.3af & 802.3at (PoE+)

Input Voltage Range: 37–57V DC

Device Classification: Class 4

Dual Output Power Rails:

5V DC / 5A (25W max) delivered via the 40-pin GPIO header

12V DC / 2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector

Total maximum combined output is 25W (subject to input power limits).

Power Supply Topology: Fully isolated switched-mode power supply (SMPS) topology

Single-Cable Solution: Delivers both power and data to the CM5 through a single Ethernet cable.

Peripheral Power: Provides a robust, dedicated 12V output for peripherals, eliminating the need for an additional external power supply.

Technical Specification

Power supply	35-57VDC powering over Ethernet
Power output	5.1V 2.5A / 12V 1.1A @ IEEE 802.3af 5.1V 5.0A / 12V 2.1A @ IEEE 802.3at
Ports & Connectors	2x2pin POE female header x1 2x2Opin GPIO extended female header x1 2-pin XH2.54 12V output connector x1
Dimension	65×43.2×22.1mm (L×W×H)

Packing List

X15-POE1 Kit

X15-POE1 board x1

screw pack x1

User Manual

Hardware Installation: https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html
How to make it work:

FAQ

Q1: Question 1

A: Place the answer here.

Enable comment auto-refresher