X1300-A2

X1300-A2 V1.0 Front View

X1300-A2 V1.0 Rear View

X1300-A2 V1.0 Wire Connection

X1300-A2 V1.0 with H505 active cooler

X1300-A2 V1.0 with H501 active cooler

Contents

Overview

The X1300-A2 is an I2S audio accessory board designed for the X1300 and X630 shield, enabling HDMI audio capture through the I2S interface. It is specifically designed to be placed on top of the Raspberry Pi, similar to a traditional HAT, and it provides a 40-pin header for easy access to the GPIO.

Features

For use with	X1300 HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board X630 HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B
Key Features	Enables HDMI audio capture through the I2S interface Offers additional advanced functions, including HDMI cable detection, bridge chip reset, and interrupt capabilities No soldering or complicated wiring needed Ultra-compact design that includes reserved space for installing a CPU heatsink Stackable design allows for attachment on bottom of other HATs Easily mountable on the Raspberry Pi, allowing you to customize your perfect case Supports active cooler up to 11.6mm in height
Technical Specification	Ports & Connectors: GPIO header x1 - 40pin pitch2.54mm 10-pin functional connector x1 - 10-pin 1.0pitch 10-pin I2S cable length: 50mm PCB Size: 65mm x 57mm

Packing List

• X1300-A2 V1.0 accessory board x 1
• 10-pin I2S cable x 1
• M2.5* 14.5 F/F Spacers x 3
• M2.5* 5 Screws x 6
• M2.5* 10 Screw x 1

User Manual

• X1300-A2 Hardware: X1300-A2 Hardware

FAQ

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher