3.5 LCD B

PI 4 ABS Case for 3.5 inch LCD

Raspberry Pi 3.5 inch LCD B

RPi 3.5inch LCD Display

PI 3 ABS Case for 3.5 inch LCD

Features

320×480 resolution
Resistive touch control
With the refresh rate of raspberry pie around 50Hz (Max. 60Hz), play video to play the game without pressure
Compatible with Raspberry Pi 4 Model B and Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions
Drivers provided (works with your own Raspbian/Ubuntu directly)
Supports Raspbian system, ubuntu system,kali Linux system

Key Parameters

LCD Type: TFT
LCD driver IC: ILI9486L
LCD Interface: SPI (up to 125MHz SPI input， Max FPS: 50Mhz)
Touch Screen Type: Resistive
Touch Screen Controller: XPT2046
Colors: 65536
Backlight: LED
Resolution: 320*480 (Pixel)
Backlight Current: 120ma
Power: 0.16A x 5V
Operating Temp. (℃): -20~70

Interface

Packing List

1 x TFT Module
1 x Touch Pen

Driver Installation

1. Install the Raspbian/UbuntuMate official mirror

Download the latest Raspbian/ubuntumate mirror from official site
Use <SDFormatter> File:SDFormatterV4.zip or SD Formatter 4.0 for SD/SDHC/SDXC to format Micro SD card
Use <Win32DiskImager> File:Win32DiskImager.zip or File:Usbit174.zip to burn the official image to Micro SD card

2. Connect with RaspberryPi

Align right-side to insert the LCD screen
Plug-in MicroSD card, connect network and power

3. Installation guide on Raspbian

Login to raspberryPi terminal by SSH (user name: pi ,password: raspberry)
Execute the following commands (raspberryPi needs to connect Internet):

or refer to https://github.com/goodtft/LCD-show

cd  /home
sudo  rm  -rf  LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod  -R  755  LCD-show
cd  LCD-show/
sudo ./LCD35-show

4: Installation guide on Ubuntu Mate, Kali, Retropie

For Ubuntu: https://github.com/lcdwiki/LCD-show-ubuntu
For Kali: https://github.com/lcdwiki/LCD-show-kali
For Retropie: https://github.com/lcdwiki/LCD-show-retropie

After the above commands are executed, the system will automatically restart and be able to display and touch normally now.

Note: after installing this driver, the HDMI output will be disabled. If it is necessary to switch back to the HDMI display, execute:

sudo ./LCD-hdmi

FAQ

Q: How to rotate the screen?

A: run the following shell command:(you need to install driver fristly, change the digital 90 to what you want)

cd LCD-show/
sudo ./rotate.sh 90

Q: Does this screen support Windows?

A: NOT support windows, and supports Raspbian/Ubuntu Mate/Kali/Retropie.

Matching ABS Case

Certificate

Enable comment auto-refresher

Anonymous user #9

17 months ago

Score 0

1.is it possible to get rid of the lag on the display. This lag is not present on the monitor mirroring the display.

2. how do I solve the issue of the raspbian GUi being cut off

Permalink | Reply

Anonymous user #8

17 months ago

Score 0

It would be nice to be able to toggle quickly between HDMI and 3.5" screen. As it is, running ./LCD35-show runs a long script requiring download of files, etc. It would be nice if LCD35-show would detect if it had already been run and just quickly reconfigure. But then, it would be nice if a reboot wasn't necessary too.

Permalink | Reply

Walker

17 months ago

Score 0

thanks for your advice

Permalink

Anonymous user #8

17 months ago

Score 0

Just set the system up and in my case the HDMI output is not disabled as indicated in the sentence above just before the FAQ section. It mirrors the content of the LCD display.

Permalink | Reply

Anonymous user #7

33 months ago

Score 0

Software Team,.... Why does installing the LCD reset the options the user has already set in raspi-config ??

Each use of the screens I have, the install software has disabled the CSI connected camera.

Permalink | Reply

Lisa

33 months ago

Score 0

Hello

It's GPIO conflict. Because both X630 and 3.5-inch screen use PIN 1~10

Permalink

Anonymous user #7

33 months ago

Score 0

2022 process. Download Buster Legacy Lite. apt-get git add LCD using git

Then for me, git clone the X630 in software reset mode, create reset script, test with Raspivid, add Mjpg-Streamer using raspicam input option and preview option, then access stream in vMix or OBS

Permalink | Reply

Anonymous user #7

33 months ago

Score 0

I have one of these screens, I have the Geekworm X630 and X630 Audio,... And everything I did to get the HDMI to CSI board running,... installing the LCD Screen and following these instructions, undid the X630 from functioning. I'll try LCD first, then HDMI to CSI board, and I2S audio eventually might work as well.

Also, two of the lines above ONLY work if 'sudo' is put in front of them, starting with sudo git clone.

Permalink | Reply

Anonymous user #6

47 months ago

Score 0

My screen is showing a rainbow color effect and is divided into sections where one is a visible desktop, but the rest are scrolling or in a constant state of moving or scrolling.

Any helpful advice?

Permalink | Reply

Xiali

47 months ago

Score 0

Hi dear，1. Is this issue happen at the beginning, or does it appear after a period of normal use? 2. Raspberry Pi leads to 40 GPIO pins, while the screen leads to 26 pins.Please make sure the corresponding screen pins and Raspberry Pi pins is correct

3. Please download the latest version of the image (Raspbian/Ubuntu Mate/Kali or Retropie) from the Raspberry Pi official website and test again.

Permalink

Anonymous user #5

51 months ago

Score 0

I've attempted to get this to run for over a week. It has not ran. I suspect the file is not working with pi 4b . Any help or advice would be nice .

Permalink | Reply