CommentStreams:5874f7f3417f0c5de52a6942843562fd

I tried with integral m2 NVMe gen3 x4 2230 and it does not work, but I do not know why. When the x1003 has the m2 connected no led is turned on. Only after I connect the PSU it blink a led from the m2 (not the x1003). If I disconnect the m2 and connect the PSU I can see 2 blue leds of the board. Then what is happening here? no led from the board means no power? I can't get the m2 recognized in the rpi5. Is the board fault? is the ssd? I need help with this.