CommentStreams:572fd3a5add023ad750aeb60f1999c53

I can confirm updating the firmware seems to work on the pi5. Have a WD black SN770. Worked with USB, didn't work with the NVMe hat. Originally would boot very slow, and couldn't reliably launch a terminal, or a web browser at all. System would freeze or go to gray screen/black screen.

Booted with the drive in a USB enclosure and went to raspi-config and loaded new bootloader/firmware through the advanced options, reinstalled the drive into the hat and now boots fine, fast, and can launch and run programs without issue.