CommentStreams:35390fc11b754b93e202c0fa82317dc6

I did a bit of digging and found the sample source in qtx120x.py and tweaked it to display to console. I can now see the Vcc value and it is fluctuating between 4.9 and 5.05V which seems a little close to the limit. Here is an example of my readings. ==================================================

        X120X UPS and RPi System Monitor         

======================================

UPS Voltage: 4.210 V Battery Capacity: 103.0 % Charging: Disabled Input Voltage: 5.065 V CPU Core Voltage: 0.720 V CPU Current: 1.027 A CPU Temperature: 67.5 °C Fan RPM: 6457 RPM System Power: 2.481 W AC Power Status: OK

========================================================================================

        X120X UPS and RPi System Monitor         

======================================

UPS Voltage: 4.210 V Battery Capacity: 103.0 % Charging: Disabled Input Voltage: 4.986 V CPU Core Voltage: 0.894 V CPU Current: 1.625 A CPU Temperature: 68.1 °C Fan RPM: 6447 RPM System Power: 3.242 W AC Power Status: OK

======================================

Press Ctrl+C to exit