CommentStreams:Afc1b1fda631faa55b3bee1184e2b900

As the RPi 4 Network adapter and USB ports have been re-arranged and using the USB connector would line up (approx) with the Network port on the RPi 4, it won't work with the instructions provided. However, (NOTE: I haven't tried this) the USB interface should work (at USB3 interface speed) with the Raspberry pi 4, but the blue cable would need to be used (assuming that the connections are the same as the short USB connector), rather than the USB-USB link connector. A modification would be to either adjust the USB link for the RPi 4, or make an alternative USB link, then the same board could be used with either RPi, just need a different USB-USB connector (or a short USB cable).