-
PoE HAT (C)
thumb|X15-POE1 [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]]
Overview
PoE HAT (C) is a Power over Ethernet (PoE+) expansion board for Raspberry Pi 3B+/4B , supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply.
Features
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B.
- Support PoE power over Ethernet, support IEEE 802.3af/at PoE/PoE+ network standard.
- Using a fully isolated switch mode power supply (SMPS).
- Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, can also supply power to additional external devices.
- Onboard high-speed active cooling fan for better heat dissipation.
Technical Specification
| Power supply | 36-57VDC powering over Ethernet |
| Power output |
5.1V 2.5A/12V 1.1A @IEEE 802.3af 5.1V 5.0A/12V 2.1A @IEEE 802.3at |
| Ports & Connectors | PoE input interface:
2x2-pin header x1 GPIO expansion interface: 2x20-pin header x1 12V output interface: 2-pin XH2.54 connector x1 |
| Dimension | 65×43.2×22.1mm (L×W×H) |
Packing List
- X15-POE1 board x1
- screw pack x1(for securing to IO Hat)
User Manual
- Hardware Installation: X15-POE1 Hardware
FAQ
Q1: Question 1
A: Place the answer here.