X15-POE1

Overview

The X15-POE1 is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the X1500 or X1501 IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while also providing a separate 12V output to support peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.

Features

Standard Compliance: IEEE 802.3af & 802.3at (PoE+)

Input Voltage Range: 37–57V DC

Device Classification: Class 4

Dual Output Power Rails:

5V DC / 5A (25W max) delivered via the 40-pin GPIO header

12V DC / 2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector

Total maximum combined output is 25W (subject to input power limits).

Power Supply Topology: Fully isolated switched-mode power supply (SMPS) topology

Single-Cable Solution: Delivers both power and data to the CM5 through a single Ethernet cable.

Peripheral Power: Provides a robust, dedicated 12V output for peripherals, eliminating the need for an additional external power supply.

Technical Specification

Power supply	35-57VDC powering over Ethernet
Power output	5.1V 2.5A / 12V 1.1A @ IEEE 802.3af 5.1V 5.0A / 12V 2.1A @ IEEE 802.3at
Ports & Connectors	2x2pin POE female header x1 2x2Opin GPIO extended female header x1 2-pin XH2.54 12V output connector x1
Dimension	65×43.2×22.1mm (L×W×H)

Packing List

X15-POE1 Kit

X15-POE1 board x1

screw pack x1

User Manual

Hardware Installation: https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html
How to make it work:

FAQ

Q1: Question 1

A: Place the answer here.

Enable comment auto-refresher