-
PoE HAT (C): Difference between revisions
| Line 7: | Line 7: | ||
==Overview== | ==Overview== | ||
The''' PoE HAT (C) ''' is a''' Power over Ethernet (PoE+) expansion board''' designed specifically for''' Raspberry Pi 3B+ and 4B''' . When used with''' 802.3af/at ''' compliant power sourcing equipment (such as PoE switches or routers), it delivers ''' both network connectivity and power supply''' through a single Ethernet cable, eliminating the need for an additional power adapter and simplifying cabling for IoT, cluster, and industrial deployments. | The''' PoE HAT (C) ''' is a''' Power over Ethernet (PoE+) expansion board''' designed specifically for''' Raspberry Pi 3B+ and 4B''' . When used with''' 802.3af/at ''' compliant power sourcing equipment (such as PoE switches or routers), it delivers ''' both network connectivity and power supply''' through a single Ethernet cable, eliminating the need for an additional power adapter and simplifying cabling for IoT, cluster, and industrial deployments. | ||
Revision as of 15:44, 23 July 2026
thumb|X15-POE1 [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]]
Overview
The PoE HAT (C) is a Power over Ethernet (PoE+) expansion board designed specifically for Raspberry Pi 3B+ and 4B . When used with 802.3af/at compliant power sourcing equipment (such as PoE switches or routers), it delivers both network connectivity and power supply through a single Ethernet cable, eliminating the need for an additional power adapter and simplifying cabling for IoT, cluster, and industrial deployments.
Features
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B.
- Support PoE power over Ethernet, support IEEE 802.3af/at PoE/PoE+ network standard.
- Using a fully isolated switch mode power supply (SMPS).
- Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, can also supply power to additional external devices. (5V USB-A Provides Up To 4A Output;MAX 25W For 12V+5V Total Output Power)
- Onboard high-speed active cooling fan for better heat dissipation.（Fan switchEN for auto running on powerup, DIS for disabling the fan）
- Onboard MP8676 Buck Chip:Incorporates Original Voltage Buck Chip Providing Up To 4.5A Output For Raspberry Pi And USB-A Port
Examples
Hardware connection You need to connect the PoE HAT to Raspberry Pi as picture:
Heat sink
Heat sink installation:
Technical Specification
| POE input voltage | 37V ~ 57V DC input |
| POE-USB Type A output voltage |
5V 4A (MAX) |
| POE-Pin header output voltage | 12V 2A (MAX) |
| Network standard | Support IEEE 802.3af/at PoE/PoE+ |
| Product size | 56.5 × 65mm |
Packing List
- PoE HAT (C) x 1
- Screw pack x 1
FAQ
Q1:Can USB devices be connected to the USB interface on the POE HAT?
A: No, the USB interface on the POE HAT can only output power and has no USB function.
Q2: What is the part number of the matching connector for the 12V plug on the PoE HAT C? Do you sell a cable suitable for connecting to a nearby product?
A: It's 2.54mm Dupont wire.