-

PoE HAT (C): Difference between revisions

From Geekworm Wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Rita (talk | contribs)
commentadmin, Administrators
765 edits
No edit summary
Rita (talk | contribs)
commentadmin, Administrators
765 edits
Line 7: Line 7:


==Overview==
==Overview==
The '''X15-POE1''' is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the '''[[X1500]]''' or '''[[X1501]] '''IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.


Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.
''' PoE HAT (C)'''  is a Power over Ethernet (PoE+) expansion board for'''  Raspberry Pi 3B+/4B''' , supporting'''  IEEE 802.3af/at ''' network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply.


==Features==
==Features==

Revision as of 11:24, 23 July 2026

thumb|X15-POE1 [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]]

Overview

PoE HAT (C) is a Power over Ethernet (PoE+) expansion board for Raspberry Pi 3B+/4B , supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply.

Features

  • Standard Compliance : IEEE 802.3af & 802.3at (PoE+)
  • Input Voltage Range : 36–57V DC
  • Device Classification : Class 4
  • Dual Output Power Rails :

5V DC / 5A (25W max) delivered via the 40-pin GPIO header.

12V DC /2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector.

Note:Total maximum combined output is 25w (subject to input power limits).

  • Fully Isolated Power Supply: Utilises isolated Switching Mode Power Supply (SMPS) topology for safety and reliability
  • Simplified Cabling: Single cable simultaneously addresses power delivery and network connectivity, providing robust power for peripherals

Technical Specification

Power supply 36-57VDC powering over Ethernet
Power output

5.1V 2.5A/12V 1.1A @IEEE 802.3af

5.1V 5.0A/12V 2.1A @IEEE 802.3at

Ports & Connectors PoE input interface:

2x2-pin header x1

GPIO expansion interface:

2x20-pin header x1

12V output interface:

2-pin XH2.54 connector x1

Dimension 65×43.2×22.1mm (L×W×H)

Packing List

  • X15-POE1 board x1
  • screw pack x1(for securing to IO Hat)

User Manual

FAQ

Q1: Question 1

A: Place the answer here.

Retrieved from "https://wiki.geekworm.com/index.php?title=PoE_HAT_(C)&oldid=37574"