UPS Scap 5V5A: Difference between revisions

Line 22:

==Features==

* ~~'''8 x SATA 3.0 Ports''' ： Connect up to eight SATA devices simultaneously to your~~ Raspberry Pi 5

* ✅ Raspberry Pi 5 Dedicated PD Handshake Power Supply: Natively compatible with the Raspberry Pi 5's non-standard 5V5A PD power supply protocol, avoiding the "insufficient power" pop-up alarm triggered by ordinary power supplies; the included USB-C adapter board can be directly stacked on the bottom of the Raspberry Pi 5 for plug-and-play functionality.

* '''High-Capacity Storage''' ： Up to 176TB theoretical total (22TB per drive; compatibility varies)

* Wide Drive Compatibility ： Works with ~~all SATA 6G, 3G, and 1.5G hard drives and SSDs~~

* Multi-Speed Support ： Supports communication speeds of 5~~.0, 3.0, and 1.5 Gbit/~~s

* HDD/SSD status LED: flashing: Solid light for device connected, ~~flashing for read/write activity, off for no device connected.~~

* Flexible Power Input ： Accepts 12V power ~~via DC jack or ATX 4~~-~~pin connector~~

* '''Unified Power Delivery''' ： High-efficiency DC/DC converter delivers up ~~to 12A to power both Pi 5 and SATA drives from a single source~~

* '''Pogo Pin Power to Pi 5''' ： Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed

* '''Automatic Drive Power Cut-off''' ： Cuts power ~~to SATA devices when Pi 5 shuts down '''(DC jack only~~; ~~not supported with ATX 4~~-~~pin) '''~~

* Splitter Cable Included ： Comes with a power SATA splitter cable to support up to 8 drives

* '''HAT-Friendly Design''' ： Mounts on the bottom of the Pi 5~~, allowing use of standard HATs with no protruding components on the bottom~~

* '''12V PWM Fan Header'''： For custom case cooling solutions

* Tested and ~~supported operating systems: Raspberry Pi OS (64~~-~~bit), OpenMediaVault (OMV)~~

* Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan

~~<font color=red>Note~~:

* ✅ 100F High-Capacity Supercapacitor Power-Off Protection: In long-run mode, it can provide up to 3 minutes and 31 seconds of continuous use under a 5V 0.5A load, allowing ample time for data writing and safe system shutdown; the supercapacitor solution eliminates the safety hazards of lithium batteries, offering long lifespan and maintenance-free operation.

*~~The X1017 does not support SATA boot with the current Raspberry Pi5 firmware~~.

*~~The X1017 powers~~ the Raspberry Pi 5 ~~via pogo pins~~. ~~Do not~~ power the Raspberry Pi 5 ~~through its USB~~-~~C port~~

* ✅ Dual Input Compatibility for Multiple Scenarios: Supports DC 9-24V wide voltage input / USB-C 12V PD fast charging input (choose one; USB-C requires a ≥30W PD/QC charger); internal dual-path isolation circuitry allows for seamless switching between charging and discharging.

* ✅ Multi-interface 5V5A output: Standard configuration includes two outputs: USB-C (with PD handshake) and USB-A, sharing a total 5A power output; additionally, there are reserved unsoldered power supply pads for the top pins. Compatible with Raspberry Pi 3B/4B/5, Orange Pi, and other 5V development boards, and can also power other 5V devices.

* ✅ Hardware-level power-down detection and intelligent power on/off: GPIO26 hardware direct connection detects power loss; onboard microcontroller manages the power-on signal, automatically powering on when power is restored from a power-off state; the accompanying official demo script supports automatically clearing the power-on pop-up window to avoid forced shutdown triggered by consecutive power losses, suitable for remote unattended operation scenarios (script needs to be deployed manually).

* ✅ I2C real-time voltage and current monitoring: Onboard INA219 chip, reading capacitor voltage and charging/discharging current via the I2C interface for easy estimation of remaining battery life; official support scripts are provided for both Raspberry Pi OS and Ubuntu dual-system compatibility.

* ✅ Comprehensive safety design: Integrated main power switch, fast discharge button, 5-level power indicator light, automatic cut-off when capacitor charging reaches 5.2V to prevent overcharge, making operation and storage safer.

</font>

@@ Line 22: / Line 22: @@
 ==Features==
-* '''8 x SATA 3.0 Ports''' ： Connect up to eight SATA devices simultaneously to your Raspberry Pi 5
+* ✅ Raspberry Pi 5 Dedicated PD Handshake Power Supply: Natively compatible with the Raspberry Pi 5's non-standard 5V5A PD power supply protocol, avoiding the "insufficient power" pop-up alarm triggered by ordinary power supplies; the included USB-C adapter board can be directly stacked on the bottom of the Raspberry Pi 5 for plug-and-play functionality.
-* '''High-Capacity Storage''' ： Up to 176TB theoretical total (22TB per drive; compatibility varies)
-* Wide Drive Compatibility ： Works with all SATA 6G, 3G, and 1.5G hard drives and SSDs
-* Multi-Speed Support ： Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s
-* HDD/SSD status LED: flashing: Solid light for device connected, flashing for read/write activity, off for no device connected.
-* Flexible Power Input ： Accepts 12V power via DC jack or ATX 4-pin connector
-* '''Unified Power Delivery''' ： High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source
-* '''Pogo Pin Power to Pi 5''' ： Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed
-* '''Automatic Drive Power Cut-off''' ： Cuts power to SATA devices when Pi 5 shuts down '''(DC jack only; not supported with ATX 4-pin)	'''
-* Splitter Cable Included ： Comes with a power SATA splitter cable to support up to 8 drives
-* '''HAT-Friendly Design''' ： Mounts on the bottom of the Pi 5,  allowing use of standard HATs with no protruding components on the bottom
-* '''12V PWM Fan Header'''：  For custom case cooling solutions
-* Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV)
-* Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan
-<font color=red>Note:
+* ✅ 100F High-Capacity Supercapacitor Power-Off Protection: In long-run mode, it can provide up to 3 minutes and 31 seconds of continuous use under a 5V 0.5A load, allowing ample time for data writing and safe system shutdown; the supercapacitor solution eliminates the safety hazards of lithium batteries, offering long lifespan and maintenance-free operation.
-*The X1017 does not support SATA boot with the current Raspberry Pi5 firmware.
-*The X1017 powers the Raspberry Pi 5 via pogo pins. Do not power the Raspberry Pi 5 through its USB-C port
+* ✅ Dual Input Compatibility for Multiple Scenarios: Supports DC 9-24V wide voltage input / USB-C 12V PD fast charging input (choose one; USB-C requires a ≥30W PD/QC charger); internal dual-path isolation circuitry allows for seamless switching between charging and discharging.
+* ✅ Multi-interface 5V5A output: Standard configuration includes two outputs: USB-C (with PD handshake) and USB-A, sharing a total 5A power output; additionally, there are reserved unsoldered power supply pads for the top pins. Compatible with Raspberry Pi 3B/4B/5, Orange Pi, and other 5V development boards, and can also power other 5V devices.
+* ✅ Hardware-level power-down detection and intelligent power on/off: GPIO26 hardware direct connection detects power loss; onboard microcontroller manages the power-on signal, automatically powering on when power is restored from a power-off state; the accompanying official demo script supports automatically clearing the power-on pop-up window to avoid forced shutdown triggered by consecutive power losses, suitable for remote unattended operation scenarios (script needs to be deployed manually).
+* ✅ I2C real-time voltage and current monitoring: Onboard INA219 chip, reading capacitor voltage and charging/discharging current via the I2C interface for easy estimation of remaining battery life; official support scripts are provided for both Raspberry Pi OS and Ubuntu dual-system compatibility.
+* ✅ Comprehensive safety design: Integrated main power switch, fast discharge button, 5-level power indicator light, automatic cut-off when capacitor charging reaches 5.2V to prevent overcharge, making operation and storage safer.
 </font>