Geekworm Wiki

X1017: Difference between revisions

← Older editNewer edit →
VisualWikitext
Rita (talk | contribs)
commentadmin, Administrators
551 edits
Rita (talk | contribs)
commentadmin, Administrators
551 edits
Line 6: Line 6:
* Do not apply power to your Raspberry Pi via the Type-C USB socket.
* Do not apply power to your Raspberry Pi via the Type-C USB socket.
* WARNIN: Over-voltage OR excessive ripple will permanently damage your HDDs/SSDs. Use a stable 12V power supply within the specified range.
* WARNIN: Over-voltage OR excessive ripple will permanently damage your HDDs/SSDs. Use a stable 12V power supply within the specified range.
*When using the ATX connector for power output, follow standard Molex current ratings (max 5A per 12V pin for long-term stability) to avoid connector overheating.
* The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
* The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
* Automatic Drive Power Cut-off: Supported with DC jack power input only. Not available when using ATX 4-pin connector.
* Automatic Drive Power Cut-off: Supported with DC jack power input only. Not available when using ATX 4-pin connector.
Retrieved from "https://wiki.geekworm.com/X1017"