X1017: Difference between revisions
| Line 5: | Line 5: | ||
*Never connect a DC power adapter AND an ATX power supply to the board simultaneously. This will permanently destroy the board and connected devices. | *Never connect a DC power adapter AND an ATX power supply to the board simultaneously. This will permanently destroy the board and connected devices. | ||
* Do not apply power to your Raspberry Pi via the Type-C USB socket. | * Do not apply power to your Raspberry Pi via the Type-C USB socket. | ||
* WARNIN:Over-voltage OR excessive ripple will permanently damage your HDDs/SSDs. Use a stable 12V power supply within the specified range. | * WARNIN: Over-voltage OR excessive ripple will permanently damage your HDDs/SSDs. Use a stable 12V power supply within the specified range. | ||
*When using the ATX connector for power output, follow standard Molex current ratings (max 5A per 12V pin for long-term stability) to avoid connector overheating. | *When using the ATX connector for power output, follow standard Molex current ratings (max 5A per 12V pin for long-term stability) to avoid connector overheating. | ||
* The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware. | * The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware. | ||