Geekworm Wiki

2.8 inch Touch Screen for Pi zero: Difference between revisions

← Older editNewer edit →
VisualWikitext
Add {{Deprecated}} template
Line 49: Line 49:


==Use Guide==
==Use Guide==
ZERO PIN:
{| class="wikitable"
! FUN !! Symbol !! Descriptions Remark     
|-
| 3V3 ||  ||
|-
| 5V0 ||  ||
|-
| GPIO2 || VSYNC || Vertical synchronous for Display DATA 
|-
| 5V0 ||  ||
|-
| GPIO3 || HSYNC || Horizontal synchronous for Display DATA 
|-
| GND ||  ||
|-
| GPIO4 || B3 || BLUE signal 3   
|-
| GPIO14 || G4 || GREEN signal 4   
|-
| GND ||  ||
|-
| GPIO15 || G5 || GREEN signal 5 
|-
| GPIO17 || G7 || GREEN signal 7
|-
| GPIO18 || NC ||
|-
| GPIO27 || TP-INT || touch int signal
|-
| GND ||  ||
|-
| GPIO22 || R5 || RED signal 5 
|-
| GPIO23 || R6 || RED signal 6
|-
| 3V3 ||  ||
|-
| GPIO24 || R7 || RED signal 7
|-
| GPIO10 || SPI-MOSI || SPI master output slave input
|-
| GND ||  ||
|-
| GPIO9 || SPI-MISO || SPI master input slave output
|-
| GPIO25 || NC ||
|-
| GPIO11 || SPI-SCLK || SPI cloclk
|-
| GPIO8 || B7 || BLUE signal 7
|-
| GND ||  ||
|-
| GPIO7 || B6 || BLUE signal 6   
|-
| GPIO1 || DE || Enable signal for Display   
|-
| GPIO0 || PCLK || Clock signal for Display Data 
|-
| GPIO5 || B4 || BLUE signal 4   
|-
| GND ||  ||
|-
| GPIO6 || B5 || BLUE signal 5   
|-
| GPIO12 || G2 || GREEN signal 2   
|-
| GPIO13 || G3 || GREEN signal 3   
|-
| GND ||  ||
|-
| GPIO19 || NC ||
|-
| GPIO16 || G6 || GREEN signal 6
|-
| GPIO26 || NC ||
|-
| GPIO20 || R3 || RED signal 3 
|-
| GND ||  ||
|-
| GPIO21 || R4 || RED signal 4   
|}


ZERO PIN: [[File:ZERO-PIN.xls]]
[[File:ZERO-PIN.xls]]


Github project: https://github.com/tianyoujian/MZDPI
Github project: https://github.com/tianyoujian/MZDPI
Retrieved from "https://wiki.geekworm.com/2.8_inch_Touch_Screen_for_Pi_zero"