X700: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 16: / Line 16: @@
 * When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X700 on the wood material or carpet and unattended.
 * Must keep the X700 away from children.
+==Features==
+{| class="wikitable"
+! ITEM !! DESCRIPTION
+|-
+| FOR USE WITH ||
+*Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+
+|-
+| OPERATING SYSTEM ||
+*Moode Audio Player
+*OSMC
+*Openelec
+*Raspbian Jessie
+*Volumio
+*Pi Core Player
+|-
+| KEY FEATURES ||
+*Ideal storage solution for Jetson Nano - 2.5"" SATA HDD/SSD Shield
+*Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)
+*USB 3.1 Gen1 to SATA 6Gb/s bridge controller
+*USB 3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano
+*Quick file transfer with high-speed USB3.1 Gen1 connectivity  from a PC or a Mac
+*Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed
+*On-board DC power jack allows to provide enough power to HDD/SSD
+*Intelligent power management - Automatic powering off when system shutdown
+*With 1 Female to 2 Male DC cable supplied to power both T300 and Jetson Nano
+*USB bus-powered or powered by external power adapter
+*LED blue indicator indicates drive status
+|-
+| Specification ||
+*Power supply: 6-26Vdc，≥3A recommended
+*GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
+*Analog audio input level via onboard headphone jack : 2V RMS
+*Amplifier max output power: 2×100W at 4Ω BTL Load at 21Vdc
+*Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
+*PCB size 87 x 56mm
+|-
+| DIMENSION ||
+*PCB Size: 123mm x 79mm
+|-
+|  NOTE ||
+<span class="tb_red">*WARNING: Do not apply power to your Raspberry Pi via the PI's Micro USB socket.</span>
+|}
 ==Features==