X1208: Difference between revisions
| Line 16: | Line 16: | ||
==Features== | ==Features== | ||
{| class="wikitable" | |||
|- | |||
| '''For use with''' || | |||
Raspberry Pi 5 | |||
|- | |||
| '''Key Features''' || | |||
'''UPS Output''' | |||
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems | |||
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications | |||
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss | |||
* Power the Pi directly through the 40-pin header, eliminating the need for cables and soldering | |||
'''Battery Charging''' | |||
* Supports battery charging with a capacity of 1500mA | |||
* Battery charging control can be managed via GPIO | |||
* Provides protection against battery overcurrent and overvoltage | |||
* Built-in protection against reverse connection of battery cells | |||
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over I2C | |||
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100% | |||
* Features a single 21700 battery holder, supporting a battery of up to 5000mAh | |||
'''Power Input''' | |||
* Powered through the USB-C socket, eliminating the need to change your power adapter | |||
'''Enhanced Power Management''' | |||
* Seamless power switching between backup power and the power adapter | |||
* On-board push button performs the same actions as the Pi's power button | |||
* Automatically cuts off power when the Pi is shut down | |||
* On-board LED indicates power status and Pi detection | |||
* AC power loss and power adapter failure detection via GPIO | |||
* Auto power-on when power is applied or restored | |||
* Automatic safe shutdown when battery voltage is low (programmable) | |||
* Ultra-low standby power consumption to maximize battery life | |||
* Advanced system power-path management to minimize frequent charging and discharging of batteries | |||
'''M.2 M key NVMe socket''' | |||
* Supports high-capacity M.2 NVMe solid-state drives up to 4TB | |||
* Accommodates various M.2 NVMe SSD form factors, including 2280, 2242, and 2230 | |||
* Supports operating system booting from your SSD | |||
* Offers fast data transfer speeds with PCIe 2.0 5Gbps / PCIe 3.0 8Gbps | |||
* Does not compromise cooling performance and is fully compatible with the official active cooler | |||
* Features a blue LED indicator that displays power and drive status | |||
* High-efficiency converter delivers 3.5A to your SSD | |||
'''Compatible Accessories''' | |||
* X1100 USB3 to SATA 2.5 HDD/SSD shield for Pi 5 | |||
* Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi. | |||
|- | |||
| '''Spec''' || | |||
<span style="color:red">'''Power input:''' 5Vdc 5A via USB-C (Input current below 5A may cause improper operation.)</span> | |||
'''UPS output:''' 5.1V ±5% Max 5A | |||
'''Battery charging current:''' 1.5A | |||
'''Terminal Battery Voltage:''' 4.23V | |||
'''Battery Recharge Threshold:''' 4.1V | |||
'''Ports & Connectors:''' | |||
* USB-C power in connector x1 | |||
* 1-cell 21700 battery connector x1 | |||
* SSD socket - M.2 KEY-M 67P x1 | |||
* 40-pin extended GPIO header x1 | |||
'''PCB Size:''' 86.5mm x 84.5mm | |||
|- | |||
|} | |||
==Packing List== | ==Packing List== | ||