Difference between revisions of "X15-POE1"
| Line 53: | Line 53: | ||
==User Manual== | ==User Manual== | ||
| − | * Hardware Installation: | + | * Hardware Installation: https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html |
| − | https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html | ||
* How to make it work: | * How to make it work: | ||
Revision as of 14:10, 17 September 2025
Overview
The X15-POE1 is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the X1500 or X1501 IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.
Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while also providing a separate 12V output to support peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.
Features
- Standard Compliance: IEEE 802.3af & 802.3at (PoE+)
- Input Voltage Range: 37–57V DC
- Device Classification: Class 4
- Dual Output Power Rails:
- 5V DC / 5A (25W max) delivered via the 40-pin GPIO header
- 12V DC / 2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector
Total maximum combined output is 25W (subject to input power limits).
- Power Supply Topology: Fully isolated switched-mode power supply (SMPS) topology
- Single-Cable Solution: Delivers both power and data to the CM5 through a single Ethernet cable.
- Peripheral Power: Provides a robust, dedicated 12V output for peripherals, eliminating the need for an additional external power supply.
Technical Specification
| Power supply | 35-57VDC powering over Ethernet |
| Power output | 5.1V 2.5A / 12V 1.1A @ IEEE 802.3af
5.1V 5.0A / 12V 2.1A @ IEEE 802.3at |
| Ports & Connectors | 2x2pin POE female header x1
2x2Opin GPIO extended female header x1 2-pin XH2.54 12V output connector x1 |
| Dimensions | 65×43.2×22.1mm (L×W×H) |
Packing List
X15-POE1 Kit
- X15-POE1 board x1
- screw pack x1
User Manual
- Hardware Installation: https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html
- How to make it work:
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher