Difference between revisions of "Test Case"

From Geekworm Wiki
Jump to navigation Jump to search
 
Line 1: Line 1:
−
===Flash OS image===
 
−
 
−
First, decide which CM4 module you wish to use:
 
−
 
−
#CM4 without eMMC (simpler, but you need a 16GB or 32GB micro sd)
 
−
#CM4 with eMMC (requires additional steps)
 
−
'''Option 1: CM4 without eMMC'''
 
−
:'''1. Prepair flash tools:'''
 
−
:*You can use '''Raspberry Pi Imager''' or one of the following tools:
 
−
:*[https://etcher.balena.io/ balenaEtcher]: Compatible with Windows, macOS, and Ubuntu.
 
−
:* [https://i-win32diskimager.com/ Win32 Disk Imager]: Designed for Windows.
 
−
:'''2. Flash the OS Image to a MicroSD Card'''
 
−
:*Follow [https://docs.pikvm.org/flashing_os the straightforward instructions] or [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system the Official installation tutorial]
 
−
:'''3. Power the Device'''
 
−
:*Power on your device, then open a browser and log in to the PiKVM web UI.
 
−
 
−
'''Option 2: CM4 with eMMC (requires additional steps)'''
 
−
:'''1. Prepare for Flashing'''
 
−
:*Short the nBOOT Pin as shown in the image below.
 
−
::[[File:X680-IMG-5615-3.jpg|500px]]
 
−
: '''2. Connect X680 to Your Computer'''
 
−
:*Use a Type-A to Type-B USB cable to connect the CM4 USB port to your computer.
 
−
::[[File:X680-IMG-5546-3.jpg|500px]]
 
−
: '''3. Power the Device'''
 
−
:*Use a 5V power adapter to power the device via the PWR DC Jack.
 
−
: '''4. Flash the OS Image'''
 
−
:*You need: i) install rpiboot utility, ii) install RaspberryPI imager  iii) format the eMMC once connected to the host, iv) select OS, eMMC appearing on the host and flash it via imager
 
−
:*You can refer to [https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot Jeff's tutorial] or [https://www.raspberrypi.com/documentation/computers/compute-module.html#flash-compute-module-emmc Raspberry Pi Official Tutorial] for detailed instructions on flashing the OS.
 
−
: '''5. Complete the Process'''
 
−
:*Remove the nBOOT jumper after the flashing is complete, then restart your device.
 
−
Note: For CM4 with eMMC, the SD card cannot be used.
 
−
 
  
 
Raspberry Pi AI document:
 
Raspberry Pi AI document:

Latest revision as of 11:26, 19 July 2024

Raspberry Pi AI document:

https://www.raspberrypi.com/documentation/accessories/ai-kit.html

https://www.raspberrypi.com/news/raspberry-pi-ai-kit-available-now-at-70/

例子工程： https://github.com/hailo-ai/hailo-rpi5-examples

Retrieved from "https://wiki.geekworm.com/index.php?title=Test_Case&oldid=21235"