Changes

NASPi CM4-M2

133 bytes added, 15:38, 21 July 2023

==User Manual==

Please follow the steps below===1. Flash OS into the micro SD card=== A If you use CM4 without emmc, you mush purchase a micro sd memory case, then follow the instructions here, a minimum 16 Gb class 10 memory card is recommended.

Please refer to [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]

~~In fact, you~~ ===2. Flash OS into the eMMC of CM4 (CM4 with eMMC)===You can falsh OS into the eMMC if you use the CM4 '''with eMMC''', refer to the following step, thus you don't need purchase the Micro SD card ~~===Flash OS into the eMMC of CM4 (CM4 with eMMC)===~~

1. Short OTG Pin, refer to the picture below.

'''PS：If you use CM4 with eMMC, then SD card cannot be used.'''

==Preconfigure Device for CM4==

Harry

Bureaucrats, Comment administrators, Interface administrators, Administrators

5,235

edits