2,288
edits
Changes
Jump to navigation
Jump to search
The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
NASPi Gemini 2.5 is composed of three parts: [[X882]] dual 2.5" SATA HDD/SSD shield, NASPi Gemini 2.5 metal case and heat dissipation system(3Pin 4010 PWM fan with metal bracket). To get better heat dissipation of NASPi Gemini2.5, it also support install Max 7mm thickness heatsink above Pi4, as we use the M2.5*11+6mm spacers to fix the PWM fan with metal bracket. There is space for extra heatsink installation on Pi4.
'''Note:'''
* <span style="color:red;">Power NASPi Gemini 2.5 via USB-C or DC jack of X882 shield, DO NOT power via USB-C of Raspberry Pi 4, or you can't use the AUTO ON & Safe shutdown function</span>
* Because the shielding of the metal casing will cause the <span style="color:red;">loss of 2.4G wifi signal</span>, we only recommend you to use Ethernet or 5G WiFi.
* Support Max 7mm thickness heatsinks on Raspberry Pi 4 as we use 11mm height spacers for the fan with bracket installation on Pi4.
* Support Max 16mm thickness 2.5" SATA HDD/SSD installation.
* Insert the SD card into Raspberry Pi 4 first before NASPi Gemini 2.5 installation start.
* The Raspberry Pi 4 board, 2.5" SATA SSDs/HDDs, power adapter are all not included in the packing list.
We found that some newbies always ask strange questions about RAID;
Please note: NASPi-Gemini 2.5 is a hardware RAID. It supports RAID at the hardware level and does not require any software configuration. This has nothing to do with software, even if OMV does not support RAID settings;
==Features==