-

RP2040-Zero: Difference between revisions

From Geekworm Wiki
Jump to navigation Jump to search
Newer edit →
VisualWikitext
Rita (talk | contribs)
commentadmin, Administrators
771 edits
Created page with "{{GD Template Impl}} [[|thumb|RP2040-Zero]] [[|thumb|RP2040-Zero]] [[|thumb|RP2040-Zero]] ==Overview== ''' RP2040-Zero ''' is a tiny, low-cost Pico-compatible microcontroller module based on Raspberry Pi RP2040 dual-core chip. Its castellated edge pads allow direct SMD surface mounting for mass production integration. ## 2. Core Hardware Specs | Item | Specifications | | ---- | -------------- | | Main Controller | RP2040 dual-core Arm Cortex-M0+, max 133MHz clock | |..."
 
Rita (talk | contribs)
commentadmin, Administrators
771 edits
No edit summary
Line 7: Line 7:
''' RP2040-Zero  ''' is a tiny, low-cost Pico-compatible microcontroller module based on Raspberry Pi RP2040 dual-core chip. Its castellated edge pads allow direct SMD surface mounting for mass production integration.  
''' RP2040-Zero  ''' is a tiny, low-cost Pico-compatible microcontroller module based on Raspberry Pi RP2040 dual-core chip. Its castellated edge pads allow direct SMD surface mounting for mass production integration.  


## 2. Core Hardware Specs
| Item | Specifications |
| ---- | -------------- |
| Main Controller | RP2040 dual-core Arm Cortex-M0+, max 133MHz clock |
| Memory | 264KB SRAM, 2MB onboard NOR Flash (W25Q16JVUXIQ) |
| Power Supply | ME621 LDO regulator, max 800mA output; support 5V USB-C power input.<br>Independent power pins reserved: 5V power input, GND ground, 3.3V power output for external sensor power supply. |
| IO Resources | 29 multi-function gold-plated GPIO pins, compatible with manual soldering & SMT mass production.<br>Integrated 3-channel ADC, hardware I2C/SPI/UART/PIO peripherals. |
| Onboard Peripherals | USB-C port, BOOT download button, RESET button, WS2812 programmable RGB LED |
| Dimension | 18.00mm × 23.50mm |
==Features==
* Based on standard''' Raspberry Pi 40-pin GPIO interface''', compatible with '''Raspberry Pi 3B+/4B'''; stackable pass-through design supports mounting '''additional HATs'''
* Supports '''PoE power over Ethernet''', compliant with IEEE 802.3af/at PoE/PoE+ network standards
* Adopts fully isolated switch mode power supply (SMPS)
* Onboard original MP8676 buck chip, providing up to''' 4.5A '''total output for Raspberry Pi mainboard and USB-A port
* Onboard USB Type-A interface: ensures stable power supply for Raspberry Pi while supplying power for additional external devices, with 5V 4A maximum output  <span style="color:red">'''(power only, no data transmission)'''</span>
* Onboard 2-pin 12V header with 12V 2A maximum output (2.54mm Dupont)
* Equipped with high-speed active cooling fan for better heat dissipation (Fan switch: EN for auto running on powerup, DIS for disabling the fan)
*  <span style="color:red">Please note: '''25W maximum''' combined output power for 12V pin header and 5V USB-A port</span>


== Technical Specification==
== Technical Specification==
Line 32: Line 13:


|-
|-
| POE input voltage|| 37V ~ 57V DC input
| Main Controller|| RP2040 dual-core Arm Cortex-M0+, max 133MHz clock


|-
|-
|Raspberry Pi mainboard output|| Up to 4.5A (via MP8676 buck chip)
|Memory|| 264KB SRAM, 2MB onboard NOR Flash (W25Q16JVUXIQ)


|-
|-
| POE-USB Type A output|| 5V 4A (MAX)
| Power Supply|| ME621 LDO regulator, max 800mA output; support 5V USB-C power input. Independent power pins are reserved on board: 5V power input, GND ground, 3.3V power output for external sensor power supply.


|-
|-
| POE-Pin header output|| 12V 2A (MAX)
| IO Resources|| 29 multi-function GPIO pins, integrated 3-channel ADC, hardware I2C/SPI/UART/PIO peripherals. All GPIO pads are gold-plated, compatible with both manual soldering and SMT mass production.


|-
|-
| Total combined peripheral output power|| 25W MAX (12V pin header + 5V USB-A port)
| Onboard Peripherals|| USB-C port, BOOT download button, RESET button, WS2812 programmable RGB LED


|-
|-
| Network standard || Support IEEE 802.3af/at PoE/PoE+
| Dimension || 18.00mm × 23.50mm


|-
|-
| Product size || 56.5 × 65mm
| || 56.5 × 65mm


|-
|-
Line 56: Line 37:
|}
|}


==Examples==
== Supported Development Environment==
{| class="wikitable"


'''Hardware connection'''
|-
You need to connect the PoE HAT to Raspberry Pi as picture:
| Programming Language|| C/C++ SDK, MicroPython


[[File:PoE-HAT-C-02.jpg|900px]]
|-
|Compatible IDE|| VS Code, Arduino IDE, Thonny Python Editor


'''Heat sink'''
|-
Heat sink installation:
|Compatible IDE|| VS Code, Arduino IDE, Thonny Python Editor


[[File:PoE-HAT-C-07.jpg|900px]]
|}


==Dimensions & Package Contents==
==Dimensions & Package Contents==


* 1 × PoE HAT (C)
* 1 × RP2040-Zero HAT
* 4 × Brass standoffs
* 4 × Mounting screws
* 4 × Nuts


[[File:POE-HAT-C-05.jpg | 650px]]
[[ 650px]]


==FAQ==
==FAQ==

Revision as of 17:28, 28 July 2026

[[|thumb|RP2040-Zero]] [[|thumb|RP2040-Zero]] [[|thumb|RP2040-Zero]]

Overview

RP2040-Zero is a tiny, low-cost Pico-compatible microcontroller module based on Raspberry Pi RP2040 dual-core chip. Its castellated edge pads allow direct SMD surface mounting for mass production integration.


Technical Specification

Main Controller RP2040 dual-core Arm Cortex-M0+, max 133MHz clock
Memory 264KB SRAM, 2MB onboard NOR Flash (W25Q16JVUXIQ)
Power Supply ME621 LDO regulator, max 800mA output; support 5V USB-C power input. Independent power pins are reserved on board: 5V power input, GND ground, 3.3V power output for external sensor power supply.
IO Resources 29 multi-function GPIO pins, integrated 3-channel ADC, hardware I2C/SPI/UART/PIO peripherals. All GPIO pads are gold-plated, compatible with both manual soldering and SMT mass production.
Onboard Peripherals USB-C port, BOOT download button, RESET button, WS2812 programmable RGB LED
Dimension 18.00mm × 23.50mm
56.5 × 65mm
Cooling Active cooling fan with EN/DIS control switch

Supported Development Environment

Programming Language C/C++ SDK, MicroPython
Compatible IDE VS Code, Arduino IDE, Thonny Python Editor
Compatible IDE VS Code, Arduino IDE, Thonny Python Editor

Dimensions & Package Contents

  • 1 × RP2040-Zero HAT

650px

FAQ

Q1:Can USB devices be connected to the USB interface on the POE HAT?

A: No, the USB interface on the POE HAT can only output power and has no USB function.

Q2: What is the part number of the matching connector for the 12V plug on the PoE HAT C? Do you sell a cable suitable for connecting to a nearby product?

A: It's 2.54mm Dupont wire.


Retrieved from "https://wiki.geekworm.com/index.php?title=RP2040-Zero&oldid=37650"