PoE HAT (C)

thumb|X15-POE1 [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]]

Overview

PoE HAT (C) is a Power over Ethernet (PoE+) expansion board for Raspberry Pi 3B+/4B , supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply.

Features

• Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B.
• Support PoE power over Ethernet, support IEEE 802.3af/at PoE/PoE+ network standard.
• Using a fully isolated switch mode power supply (SMPS).
• Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, can also supply power to additional external devices.
• Onboard high-speed active cooling fan for better heat dissipation.

Technical Specification

POE input voltage	37V ~ 57V DC input
POE-USB Type A output voltage	5V 4A (MAX)
POE-Pin header output voltage	12V 2A (MAX)
Network standard	Support IEEE 802.3af/at PoE/PoE+
Product size	56.5 × 65mm

Packing List

• X15-POE1 board x1

• screw pack x1(for securing to IO Hat)

User Manual

• Hardware Installation: X15-POE1 Hardware

FAQ

Q1: Question 1

Can USB devices be connected to the USB interface on the POE HAT?

A: Place the answer here.

No, the USB interface on the POE HAT can only output power and has no USB function.

Q2: Question 2

What is the part number of the matching connector for the 12V plug on the PoE HAT C? Do you sell a cable suitable for connecting to a nearby product?

A: It's 2.54mm Dupont wire.