-
PoE HAT (C): Difference between revisions
Jump to navigation
Jump to search
| Line 23: | Line 23: | ||
|- | |- | ||
| | | POE input voltage|| 37V ~ 57V DC input | ||
|- | |- | ||
| | | POE-USB Type A output voltage|| | ||
5V 4A (MAX) | |||
|- | |||
| POE-Pin header output voltage || 12V 2A (MAX) | |||
|- | |- | ||
| | | Network standard || Support IEEE 802.3af/at PoE/PoE+ | ||
|- | |- | ||
| | | Product size || 56.5 × 65mm | ||
|} | |} | ||
Revision as of 11:28, 23 July 2026
thumb|X15-POE1 [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]]
Overview
PoE HAT (C) is a Power over Ethernet (PoE+) expansion board for Raspberry Pi 3B+/4B , supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply.
Features
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B.
- Support PoE power over Ethernet, support IEEE 802.3af/at PoE/PoE+ network standard.
- Using a fully isolated switch mode power supply (SMPS).
- Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, can also supply power to additional external devices.
- Onboard high-speed active cooling fan for better heat dissipation.
Technical Specification
| POE input voltage | 37V ~ 57V DC input |
| POE-USB Type A output voltage |
5V 4A (MAX) |
| POE-Pin header output voltage | 12V 2A (MAX) |
| Network standard | Support IEEE 802.3af/at PoE/PoE+ |
| Product size | 56.5 × 65mm |
Packing List
- X15-POE1 board x1
- screw pack x1(for securing to IO Hat)
User Manual
- Hardware Installation: X15-POE1 Hardware
FAQ
Q1: Question 1
A: Place the answer here.