X1017: Difference between revisions

Line 44:

{| class="wikitable"

|-

|Power input|| 12Vdc ± 5%(Warning: Over-voltage will damage your HDDs!)

|'''Power input'''|| 12Vdc ± 5%(Warning: Over-voltage will damage your HDDs!)

Intput Ripple & Noise: 200mVp-p Max

|-

|Recommended power supply via DC jack||

|'''Recommended power supply via DC jack'''||

* 8 x SATA 2.5" HDD/SSD : 12V 10A adapter x1

* 4 x SATA 3.5" HDD : 12V 10A adapter x1

* 8 x SATA 3.5" HDD : 12V 10A adapter x2

(two parallel DC jacks, can be used simultaneously)

|-

|Recommended power supply via 4-pin ATX connector|| 12V 20A

|'''Recommended power supply via 4-pin ATX connector'''|| 12V 20A

(Do ~~not~~ connect both DC power and ATX 4-pin power simultaneously ~~(mixing~~ these two ~~different~~ power ~~supply~~ methods will ~~damage~~ the ~~device)~~.)

⚠️ CRITICAL WARNING: Do NOT connect both DC power and ATX 4-pin power simultaneously. Mixing these two power methods will permanently destroy the board and connected devices.

|-

| Raspberry Pi Power Supply || 5.1V ±5%, maximum 12A (output via spring pin)

| '''Raspberry Pi Power Supply''' || 5.1V ±5%, maximum 12A (output via spring pin)

|-

| Ports & Connectors ||

| '''Ports & Connectors''' ||

* DC power jack 5.5x2.1mm x2

* ATX 4-PIN power in/out connector x1

Line 70:

Line 72:

* 4-pin function header x1

|-

| ~~Expansion Interface||~~ 4-pin ~~functional connector (~~Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output)

| '''4-pin Function Header Pinout'''|| Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)

|-

| PCB Size || 100mm × 86mm

| '''PCB Size''' || 100mm × 86mm

|-

|PCIe cable length|| 37mm

|'''PCIe cable length'''|| 37mm

@@ Line 44: / Line 44: @@
 {| class="wikitable"
 |-
-|Power input||  12Vdc ± 5%<font color=red>(Warning: Over-voltage will damage your HDDs!)</font>
+|'''Power input'''||  12Vdc ± 5%<font color=red>(Warning: Over-voltage will damage your HDDs!)</font>
 Intput Ripple & Noise: 200mVp-p Max
 |-
-|Recommended power supply via DC jack||
+|'''Recommended power supply via DC jack'''||
 * 8 x SATA 2.5" HDD/SSD : 12V 10A adapter x1
 * 4 x SATA 3.5" HDD : 12V 10A adapter x1
 * 8 x SATA 3.5" HDD : 12V 10A adapter x2
+(two parallel DC jacks, can be used simultaneously)
 |-
-|Recommended power supply via 4-pin ATX connector||  12V 20A
+|'''Recommended power supply via 4-pin ATX connector'''||  12V 20A
-<font color=red>(Do not connect both DC power and ATX 4-pin power simultaneously (mixing these two different power supply methods will damage the device).)</font>
+<font color=red>⚠️ CRITICAL WARNING: Do NOT connect both DC power and ATX 4-pin power simultaneously. Mixing these two power methods will permanently destroy the board and connected devices.</font>
 |-
-| Raspberry Pi Power Supply || 5.1V ±5%, maximum 12A (output via spring pin)
+| '''Raspberry Pi Power Supply''' || 5.1V ±5%, maximum 12A (output via spring pin)
 |-
-| Ports & Connectors ||
+| '''Ports & Connectors''' ||
 * DC power jack 5.5x2.1mm x2
 * ATX 4-PIN power in/out connector x1
@@ Line 70: / Line 72: @@
 * 4-pin function header x1
 |-
-| Expansion Interface|| 4-pin functional connector (Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output)
+| '''4-pin Function Header Pinout'''|| Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)
 |-
-| PCB Size || 100mm × 86mm
+| '''PCB Size''' || 100mm × 86mm
 |-
-|PCIe cable length|| 37mm
+|'''PCIe cable length'''|| 37mm