X1017: Difference between revisions

Line 27:

* '''8 x SATA 3.0 Ports''' ： Connect up to eight SATA devices simultaneously to your Raspberry Pi 5

* '''High-Capacity Storage''' ： Supports up to 176TB total capacity (22TB per drive).

* Wide Drive Compatibility - Works with SATA 6G, 3G, and 1.5G hard drives

* Wide Drive Compatibility ： Works with SATA 6G, 3G, and 1.5G hard drives

* Multi-Speed Support - Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s

* Multi-Speed Support ： Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s

* Easy to use - Simple setup with LED indicators for drive status

* Easy to use ： Simple setup with LED indicators for drive status

* Flexible Power Input - Accepts 12V power via DC jack or ATX 4-pin connector

* Flexible Power Input ： Accepts 12V power via DC jack or ATX 4-pin connector

* Unified Power Delivery - High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source

* '''Unified Power Delivery''' ： High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source

* Pogo Pin Power to Pi 5 - Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed

* '''Pogo Pin Power to Pi 5''' ： Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed

* Automatic Drive Power Cut-off - Cuts power to SATA devices when Pi 5 shuts down (DC jack only; not supported with ATX 4-pin)

* '''Automatic Drive Power Cut-off''' ： Cuts power to SATA devices when Pi 5 shuts down '''(DC jack only; not supported with ATX 4-pin) '''

* Splitter Cable Included - Comes with a power SATA splitter cable to support up to 8 drives

* Splitter Cable Included ： Comes with a power SATA splitter cable to support up to 8 drives

* HAT-Friendly Design - Mounts on the bottom of the Pi 5, allowing you to use your favorite HATs alongside it

* '''HAT-Friendly Design''' ： Mounts on the bottom of the Pi 5, allowing you to use your favorite HATs alongside it

* External Power Button Header - Easy DIY case integration

* External Power Button Header ： Easy DIY case integration

* 12V PWM Fan Header ~~- Perfect for your~~ custom cooling ~~setup~~

* '''12V PWM Fan Header'''： For custom case cooling solutions (⚠️ Only for 12V PWM fans; 5V fans will be damaged)

* Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV)

* Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan

@@ Line 27: / Line 27: @@
 * '''8 x SATA 3.0 Ports''' ： Connect up to eight SATA devices simultaneously to your Raspberry Pi 5
 * '''High-Capacity Storage''' ： Supports up to 176TB total capacity (22TB per drive).
-* Wide Drive Compatibility - Works with SATA 6G, 3G, and 1.5G hard drives
+* Wide Drive Compatibility ： Works with SATA 6G, 3G, and 1.5G hard drives
-* Multi-Speed Support - Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s
+* Multi-Speed Support ： Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s
-* Easy to use - Simple setup with LED indicators for drive status
+* Easy to use ： Simple setup with LED indicators for drive status
-* Flexible Power Input - Accepts 12V power via DC jack or ATX 4-pin connector
+* Flexible Power Input ： Accepts 12V power via DC jack or ATX 4-pin connector
-* Unified Power Delivery - High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source
+* '''Unified Power Delivery''' ： High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source
-* Pogo Pin Power to Pi 5 - Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed
+* '''Pogo Pin Power to Pi 5''' ： Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed
-* Automatic Drive Power Cut-off - Cuts power to SATA devices when Pi 5 shuts down (DC jack only; not supported with ATX 4-pin)
+* '''Automatic Drive Power Cut-off''' ： Cuts power to SATA devices when Pi 5 shuts down '''(DC jack only; not supported with ATX 4-pin)	'''
-* Splitter Cable Included - Comes with a power SATA splitter cable to support up to 8 drives
+* Splitter Cable Included ： Comes with a power SATA splitter cable to support up to 8 drives
-* HAT-Friendly Design - Mounts on the bottom of the Pi 5, allowing you to use your favorite HATs alongside it
+* '''HAT-Friendly Design''' ： Mounts on the bottom of the Pi 5, allowing you to use your favorite HATs alongside it
-* External Power Button Header - Easy DIY case integration
+* External Power Button Header ： Easy DIY case integration
-* 12V PWM Fan Header - Perfect for your custom cooling setup
+* '''12V PWM Fan Header'''：  For custom case cooling solutions (⚠️ Only for 12V PWM fans; 5V fans will be damaged)
 * Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV)
 * Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan