X1017: Difference between revisions
| Line 33: | Line 33: | ||
{| class="wikitable" | {| class="wikitable" | ||
! Power input !! 12Vdc ± 5%<font color=red>(Warning: Over-voltage will damage your HDDs!)</font> | ! Power input !! 12Vdc ± 5%<font color=red>(Warning: Over-voltage will damage your HDDs!)</font> | ||
Iutput Ripple & Noise: 200mVp-p Max | |||
Recommended power supply via DC jack: | |||
* 8 x SATA 2.5" HDD/SSD : 12V 10A adapter x1 | |||
* 4 x SATA 3.5" HDD : 12V 10A adapter x1 | |||
* 8 x SATA 3.5" HDD : 12V 10A adapter x2 | |||
Recommended power supply via 4-pin ATX connector: 12V 20A | |||
<font color=red>(Warning: Only one power source should be connected at a time.)</font> | |||
|- | |- | ||
| | | Raspberry Pi Power Supply || 5.1V ±5%, maximum 12A (output via spring pin) | ||
|- | |- | ||
| | | Ports & Connectors || | ||
* DC power jack 5.5x2.1mm x2 | |||
* ATX 4-PIN power in/out connector x1 | |||
* PCIe connector - 16-pin pitch0.5mm | |||
* 7-pin SATA data connector x8 | |||
* 4-pin function header x1 | |||
|- | |- | ||
| PCB Size || | | Expansion Interface|| 4-pin functional connector (Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output) | ||
|- | |||
| PCB Size || 100mm × 86mm | |||
|- | |||
|PCIe cable length|| 37mm | |||
|} | |} | ||