-

X1209: Difference between revisions

From Geekworm Wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Abby (talk | contribs)
commentadmin, Administrators
3,505 edits
Abby (talk | contribs)
commentadmin, Administrators
3,505 edits
Line 6: Line 6:


Additionally, the X1209 offers fast charging up to 2100mA for quick battery replenishment and integrates seamlessly with compatible storage products for reliable data backup during power loss. This combination of features enhances system reliability, protects valuable data, and ensures continuous operation for Raspberry Pi users.
Additionally, the X1209 offers fast charging up to 2100mA for quick battery replenishment and integrates seamlessly with compatible storage products for reliable data backup during power loss. This combination of features enhances system reliability, protects valuable data, and ensures continuous operation for Raspberry Pi users.
{{Raspberry Pi 5 UPS Sets}}


==Features==
==Features==

Revision as of 18:12, 17 September 2025

Overview

The X1209 is a dedicated UPS expansion board for the Raspberry Pi, delivering reliable 5.1V/6000mA backup power to ensure uninterrupted operation. It is designed to support demanding setups, including those running intensive applications or multiple peripherals.

Its advanced power management system intelligently monitors the Raspberry Pi’s status, automatically cutting off power after shutdown to optimize battery life with ultra-low standby consumption. The board also features seamless power switching during outages or adapter failures, and supports convenient functions like auto power-on and AC power loss detection.

Additionally, the X1209 offers fast charging up to 2100mA for quick battery replenishment and integrates seamlessly with compatible storage products for reliable data backup during power loss. This combination of features enhances system reliability, protects valuable data, and ensures continuous operation for Raspberry Pi users. 


 ▼ Expand 📋 Geekworm Raspberry Pi 5 UPS Family:
Caution:
*The Matching Case section only indicates compatibility between the case, UPS and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.
*In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).
Model Compatible with Mounting Position Lithium battery type Battery Holders Power Input Connector Power Output Connector Matching Case Product Matching Reference Note
X1200 Raspberry Pi 5 Bottom 3.7V 18650 Battery 2-Cell
  • 5V,≥5A via USB C of X1200
 5Vdc Power Output XH2.54-2P x2 X1200-C1 -
X1201 Raspberry Pi 5 Bottom 3.7V 18650 Battery 2-Cell
  • 5V,≥5A via USB C of X1201
  • 5V,≥5A via XH2.54-2P connector of X1201
 5Vdc Power Output XH2.54-2P x3 X1201-C1 Ultra-thin
X1202 Raspberry Pi 5 Bottom 3.7V 18650 Battery 4-Cell
  • 5V,≥5A via USB C of X1202
  • 6-18V,≥3A via DC 5521 power jack of X1202
  • 6-18V,≥3A via XH2.54-2P connector of X1202
 5Vdc Power Output XH2.54-2P x2 X1202-C1 -
X1203 Raspberry Pi 5 Bottom 3.7V Lithium Battery No battery holder(recommended to use with X12-A1)
  • 5V,≥5A via USB C of X1203
  • 6-18V,≥3A via DC 5521 power jack of X1203
 5Vdc Power Output XH2.54-2P x2 - -
*X1205 Raspberry Pi 5 Bottom 3.7V 21700 Battery 2-Cell
  • 5V,≥5A via USB C of X1205
  • 9-18V,≥3A via DC 5521 power jack of X1205
  • 9-18V,≥3A via XH2.54-2P connector of X1205
 5Vdc Power Output XH2.54-2P x2 X1205-C1 -
*X1206 Raspberry Pi 5 Bottom 3.7V 21700 Battery 4-Cell

V2.0 Version

  • USB-C 5V,≥5A; DC5521 & XH2.54 9–18V ≥3A

V1.1 Version

  • USB-C 5V,≥5A; DC5521 & XH2.54 5–6V ≥5A
 5Vdc Power Output XH2.54-2P x2 X1206-C1

X1206 V2.0 Version: Geekworm 12 V / 5 A Power Adapter

-
*X1207 Raspberry Pi 5 Top 3.7V 21700 Battery 1-Cell
  • 5V,≥5A via USB C of X1207
  • 35-57V powering over Ethernet
 - X1207-C1 Support PoE-Powered
*X1208 Raspberry Pi 5 Top 3.7V 21700 Battery 1-Cell
  • 5V,≥5A via USB C of X1208
 - X1207-C1 - Support M.2 NVMe SSD 2230/2242/2280
*X1209 RPi 5B/4B/3B/3B+ Top 3.7V Lithium Battery No battery holder(recommended to use with X12-A1)
  • 5V,≥5A via USB C of X1209
  • 6-18V,≥3A via DC 5521 power jack of X1209
 5V Power Output XH2.54-2P x2 - -
*X728 All RPi that use a 40-pin header Top 3.7V 18650 Battery 2-Cell
  • 5V,≥5A via USB C of X728
  • 5V,≥5A via DC 5521 power jack of X728
 5V Power Output
  • The 40-pin header
  • XH2.54-2P x2
 - -
*X-UPS1 All RPi & Most Single Board Computers (SBC) that uses 12Vdc or 5Vdc Standalone 3.7V 18650 Battery 4-Cell
  • 6-18V,≥3A via DC 5521 power jack of X-UPS1
  • 5Vdc Power Output XH2.54-2P x2
  • 12Vdc Power Output XH3.96-2P x2
 -
  • GPIO Pin-connected standalone design, boasting universal compatibility
  • Power Adapter: PSU60
 -

Features

For use with

Raspberry Pi 5 Model B / 4 Model B / 3 Model B

Key Features

UPS Output

  • Designed for continuous long-duration operation (duration depends on battery type and applications)
  • Supports a maximum current output of 5.1V 6000mA, suitable for most Raspberry Pi applications
  • Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
  • Power the Pi directly through the 40-pin header, eliminating the need for cables and soldering
  • Equipped with XH2.54 connectors for 5V power output

Battery Charging

  • Supports fast battery charging with a capacity of 2100mA
  • Battery charging control can be managed via GPIO
  • Provides protection against battery overcurrent and overvoltage
  • Built-in protection against reverse connection of battery cells
  • Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
  • On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
  • Features two XH2.54 battery connectors

Power Input

  • Integrated high-efficiency step-down DC-DC converter
  • Wide operating input range of 6V to 18V
  • Provides up to 6A output current, enabling 2.1A fast charging while powering the system
  • Allows power input from various sources such as a car, solder panel, and more
  • Common power input jack size of 5.5x2.1mm
  • Compatible with Raspberry Pi USB-C Power Supply

Enhanced Power Management

  • Seamless power switching between backup power and power adapter
  • On-board push button performs the same actions as the Pi's power button (Pi 5 only)
  • Automatically cuts off power when the Pi is shut down
  • On-board LED indicates power status and Pi detection
  • AC power loss and power adapter failure detection via GPIO
  • Auto power-on when power is applied or restored
  • Automatic safe shutdown when battery voltage is low (programmable)
  • Ultra-low standby power consumption to maximize battery life
  • Advanced system power-path management to minimize frequent charging and discharging of batteries

Compatible Accessories

  • X1002 single NVMe shield for Pi5
  • X1005 dual NVMe shield for Pi5
  • X1006 PCIe to SATA 2.5 HDD+M.2 SSD shield for Pi 5
  • X1007 PCIe to dual SATA 2.5 HDD/SSD shield for Pi 5
  • X1100 USB3 to SATA 2.5 HDD/SSD shield for Pi 5
  • Other add-on boards are attached to the bottom of the Raspberry Pi
Technical Specification

Power input:

  • 6-18Vdc via DC jack (12Vdc ≥3A power adapter recommended)
  • 5Vdc 5A via USB-C


UPS output:5.1V ±5% Max 6A


Battery charging current: 2.1A (IMPORTANT !!-- Please confirm before connecting your battery.)


Terminal Battery Voltage: 4.23V (IMPORTANT !!-- Please confirm before connecting your battery.)


Battery Recharge Threshold: 4.1V


Ports & Connectors:

  • DC power jack x1- 5.5x2.1mm
  • USB-C power in connector x1
  • XH2.54 battery connector x2
  • 5V Power output connector x2 - XH2.54 2-pin
  • 40-pin extended GPIO header x1


PCB Size: 65mm x 57mm

Notes
  • Do not apply power to your Raspberry Pi via the Type-C USB socket.

Packing List

  • X1209 V1.0 UPS board x1
  • Spacer M2.5 F/F 13.5mm x4
  • Screw M2.5x5mm x8
  • Pogo pin x1 (For use with Pi 5 only)

User Manual

FAQ

Q1: Question 1

A: Place the answer here.

<comments />

Retrieved from "https://wiki.geekworm.com/index.php?title=X1209&oldid=23807"