X1208: Difference between revisions
| Line 23: | Line 23: | ||
| '''Key Features''' || | | '''Key Features''' || | ||
'''UPS Output''' | '''UPS Output''' | ||
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems | * Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi 5 systems | ||
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications | * Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi 5 applications | ||
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss | * Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss | ||
* Power the Pi directly through the 40-pin header, eliminating the need for cables and soldering | * Power the Pi 5 directly through the 40-pin header, eliminating the need for cables and soldering | ||
'''Battery Charging''' | '''Battery Charging''' | ||
| Line 43: | Line 43: | ||
* Seamless power switching between backup power and the power adapter | * Seamless power switching between backup power and the power adapter | ||
* On-board push button performs the same actions as the Pi's power button | * On-board push button performs the same actions as the Pi's power button | ||
* Automatically cuts off power when the Pi is shut down | * Automatically cuts off power when the Pi 5 is shut down | ||
* On-board LED indicates power status and Pi detection | * On-board LED indicates power status and Pi 5 detection | ||
* AC power loss and power adapter failure detection via GPIO | * AC power loss and power adapter failure detection via GPIO | ||
* Auto power-on when power is applied or restored | * Auto power-on when power is applied or restored | ||
| Line 61: | Line 61: | ||
'''Compatible Accessories''' | '''Compatible Accessories''' | ||
* X1100 USB3 to SATA 2.5 HDD/SSD shield for Pi 5 | * [[X1100]] USB3 to SATA 2.5 HDD/SSD shield for Pi 5 | ||
* Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi. | * Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi 5. | ||
|- | |- | ||
| '''Spec''' || | | '''Spec''' || | ||