Difference between revisions of "X15-POE1"
| Line 6: | Line 6: | ||
==Features== | ==Features== | ||
| + | |||
| + | * Bulleted list item | ||
| + | Standard Compliance: IEEE 802.3af & 802.3at (PoE+) | ||
| + | |||
| + | Input Voltage Range: 37–57V DC | ||
| + | |||
| + | Device Classification: Class 4 | ||
| + | |||
| + | |||
| + | Dual Output Power Rails: | ||
| + | |||
| + | 5V DC / 5A (25W max) delivered via the 40-pin GPIO header | ||
| + | |||
| + | 12V DC / 2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector | ||
| + | |||
| + | Total maximum combined output is 25W (subject to input power limits). | ||
| + | |||
| + | Power Supply Topology: Fully isolated switched-mode power supply (SMPS) topology | ||
| + | |||
| + | Single-Cable Solution: Delivers both power and data to the CM5 through a single Ethernet cable. | ||
| + | |||
| + | Peripheral Power: Provides a robust, dedicated 12V output for peripherals, eliminating the need for an additional external power supply. | ||
==Packing List== | ==Packing List== | ||
Revision as of 12:23, 17 September 2025
Contents
Overview
The X15-POE1 is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the X1500 or X1501 IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.
Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while also providing a separate 12V output to support peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.
Features
- Bulleted list item
Standard Compliance: IEEE 802.3af & 802.3at (PoE+)
Input Voltage Range: 37–57V DC
Device Classification: Class 4
Dual Output Power Rails:
5V DC / 5A (25W max) delivered via the 40-pin GPIO header
12V DC / 2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector
Total maximum combined output is 25W (subject to input power limits).
Power Supply Topology: Fully isolated switched-mode power supply (SMPS) topology
Single-Cable Solution: Delivers both power and data to the CM5 through a single Ethernet cable.
Peripheral Power: Provides a robust, dedicated 12V output for peripherals, eliminating the need for an additional external power supply.
Packing List
User Manual
- Hardware Installation:
- How to make it work:
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher