X1500

Overview

The X1500 is a purpose-built IO board tailored for the Raspberry Pi Compute Module 5 (CM5). It features two full-size M.2 NVMe slots and integrates a variety of peripherals into an ultra-compact design. This carrier board is meticulously engineered to streamline system development, allowing you to rapidly assemble solutions using readily available off-the-shelf components, such as existing Raspberry Pi HATs and M.2 NVMe devices.

For ease of integration, the board features a streamlined layout with major user connectors positioned along one edge, making enclosure design straightforward and efficient. Whether you're developing with the Compute Module 5 or deploying it as part of an embedded end product, the X1500 is designed to meet your needs with flexibility and performance.

Features

For use with	Raspberry Pi Compute Module 5 (CM5)
Key Features	Compact Design (87x87x25mm): Combines a small footprint with a rich array of I/O peripherals for versatile applications. Gigabit Ethernet Port: Features 1GbE with PoE+ support (for simplified power delivery) Dual M.2 2280 NVMe SSD Slots: Supports up to 8TB (4TB+4TB) via PCIe 2.0 (5Gbps) for fast data transfers and boot times, compatible with M.2 NVMe SSDs in 2280, 2242, and 2230 form factors. Dual HDMI 2.0 Ports: Enables dual 4K display output for multimedia or industrial use cases. Dual USB 3.2 Gen 1 Ports: delivering high-speed data transfer rates of up to 5 Gbps. Dual MIPI DSI/CSI-2 Connectors: 22-pin FPC connectors (0.5mm pitch) compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display integration. MicroSD Card Slot: Supports Compute Module 5 Lite variants (without onboard eMMC) Raspberry Pi HAT+ Compatibility: Reuse existing Raspberry Pi HATs to save time and reduce development costs. Convenient Power Button: Easily wake or shut down the Compute Module 5 with a single press. RTC Battery Socket (CR1220): Ensures accurate timekeeping during power interruptions. PWM Fan Support: Includes a fan power connector for adjustable cooling in demanding environments. USB-C Port: Handles both power delivery and OS image loading directly into the CM5’s eMMC. Configurable Jumpers: Allows disabling features like wireless connectivity or EEPROM writing for customization. Streamlined Connector Layout: USB, HDMI, Ethernet, and power ports are grouped along one edge for clean cable management and easy enclosure integration.
Technical Specification	Power supply: 5.1Vdc +/-5% 5A power via USB-C power supply Connectivity: USB-C (Power in and OS image loading) 1Gigabit RJ45 Ethernet with PoE+ HAT+ support (requires separate Raspberry Pi PoE+ HAT+) 2 x USB3.0 Type-A 2 x USB2.0 Type-A Standard 40-pin GPIO header microSD card socket for Compute Module 5 Lite modules 2 x M.2 M key NVMe sockets 4-pin fan connector 2 x MIPI DSI/CSI-2 FPC connectors (22-pin 0.5 mm pitch cable) Raspberry Pi HAT+ connector RTC battery socket Video: 2 x full-size HDMI 2.0 connectors Input power: External +5V USB-C PSU Power button to wake and shut down Compute Module 5 Form factor: 85mm x 87mm
Important Notes	For optimal performance, please use the official Raspberry Pi 27W USB-C Power Supply or an alternative power supply capable of delivering 5.1V at 5A. An incompatible power supply with a lower output voltage may fail to power on the system.

Packing List

CM5 carrier board Kit

• X1500 V1.0 CM5 carrier board x 1
• M.2 extension board x 2 (Supports M.2 2230 and 2242 SSDs)
• 2.54mm jumer cap x 3
• Screw pack x 1

User Manual

• Hardware Installation: X1500 Hardware
• How to make it work: X1500 Software

Matching Case

TBD

FAQ

Q1: Question 1

A: Place the answer here.

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

3 months ago

Score 0

$ sudo sh -c 'echo 1 > /sys/devices/platform/cooling_fan/hwmon/hwmon2/pwm1_enable' $ sudo sh -c 'echo 128 > /sys/devices/platform/cooling_fan/hwmon/hwmon2/pwm1' $ sudo sh -c 'echo 255 > /sys/devices/platform/cooling_fan/hwmon/hwmon2/pwm1' $ cat /sys/class/thermal/thermal_zone0/temp 64450 $ sudo vcgencmd measure_temp temp=62.6'C

thats what i use to control the fan speed manually , if that ever help someone .

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

4 months ago

Score 0

How to boot from NVME

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

4 months ago

Score 0

Hello, the same as Raspberry Pi 5.

Permalink