Difference between revisions of "X1000"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
==Features== | ==Features== | ||
+ | * Compatible with other HAT shield; | ||
+ | * FFC is only 30mm length. | ||
+ | * Supports installation of official active coolers also; | ||
+ | * Dual LED Indicators:PCE: PCie - The LED will be on if the SSD is recognised; SSD - M.2 disk activity (“ACT”). | ||
+ | * Reserved space for POE module installation | ||
+ | * Supports 2232/2240 NVME M2 ssd only. | ||
+ | * Can Power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) | ||
+ | * With 40pin pin header, it can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity SSDs. | ||
+ | |||
+ | '''PS''': | ||
+ | |||
+ | The X1000 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS | ||
+ | |||
==Packing List== | ==Packing List== |
Revision as of 11:37, 11 December 2023
Contents
Overview
The X1000 V1.3 shield is an NVME M2 2242 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
Features
- Compatible with other HAT shield;
- FFC is only 30mm length.
- Supports installation of official active coolers also;
- Dual LED Indicators:PCE: PCie - The LED will be on if the SSD is recognised; SSD - M.2 disk activity (“ACT”).
- Reserved space for POE module installation
- Supports 2232/2240 NVME M2 ssd only.
- Can Power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
- With 40pin pin header, it can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity SSDs.
PS:
The X1000 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa