Difference between revisions of "How to enable camera support in Raspbian"
Jump to navigation
Jump to search
Line 2: | Line 2: | ||
* Run the following commands in a terminal to upgrade the Raspberry Pi firmware to the latest version: | * Run the following commands in a terminal to upgrade the Raspberry Pi firmware to the latest version: | ||
''sudo apt-get update'' | ''sudo apt-get update'' | ||
− | + | ||
− | Fisheye1.png | + | [[File:Fisheye1.png]] |
− | + | ||
''sudo apt-get upgrade'' | ''sudo apt-get upgrade'' |
Revision as of 19:20, 24 April 2023
- Boot up the Pi and log in. The default username is pi, and the default password is raspberry. (Note: if you have changed these from the default then you will need to supply your own user/password details).
- Run the following commands in a terminal to upgrade the Raspberry Pi firmware to the latest version:
sudo apt-get update
sudo apt-get upgrade
- Access the configuration settings for the Pi by running the following command:
sudo raspi-config
- Navigate to “camera” and select “enable”.
- Select “Finish” and reboot.