-

X1509: Difference between revisions

From Geekworm Wiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
Ruby (talk | contribs)
commentadmin, Administrators
385 edits
Ruby (talk | contribs)
commentadmin, Administrators
385 edits
No edit summary
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{GD Template Impl}}
{{GD Template Impl}}
[[File:X1509-IMG-0922--Packing-List-1.jpg|thumb|right|X1509 Packing List]]
[[File:X1509-IMG-0942.jpg|thumb|right|X1509 with H519 Heansink]]
[[File:X1509-IMG-0964.jpg|thumb|right|X1509 with X15-F10]]
==Important Notes==
<font color=red>
*The X1509 does not support system boot from SATA drives under the current CM5 firmware version.
*The function, ''Automatic Drive Power Cut-off'',  only works with DC power input, not supported via the 4-pin ATX connector.
*When 8× 3.5" HDDs are powered on simultaneously, the inrush current reaches 16A. DC power is not applicable; please use an ATX power supply only.
*Over-voltage will permanently damage your hard drives! Please choose your power supply carefully.
</font>
==Overview==
==Overview==
 
* This X1509 board supports 8 SATA ports, delivering a high-speed and high-capacity storage solution for '''Raspberry Pi CM5'''. It reaches a total storage capacity of up to 176TB (22TB per single drive).
* This X1509 board supports 8 SATA ports, delivering a high-speed and high-capacity storage solution for Raspberry Pi CM5. It reaches a total storage capacity of up to 176TB (22TB per single drive).
* Designed with a compact form factor, it is equipped with multiple peripheral ports for extensive expansion.
* Designed with a compact form factor, it is equipped with multiple ports and versatile peripherals for extensive expansion.
* Built-in high-efficiency DC/DC step-down converter provides a stable 5V 12A output. A single power supply is sufficient to power both the CM5 module and all connected SATA storage devices.
* Built-in high-efficiency DC/DC step-down converters provide a stable 5V 12A output. A single power supply is sufficient to power both the CM5 module and all connected SATA storage devices.


Ideal for building home media centers, personal NAS systems and CCTV video storage servers.
Ideal for building home media centers, personal NAS systems and CCTV video storage servers.
Line 20: Line 31:
::OpenMediaVault (OMV)
::OpenMediaVault (OMV)
|-
|-
| '''8 SATA Ports''' ||  
| '''8 SATA Ports''' ||
:*Connect up to 8 SATA drives simultaneously, with a '''maximum total storage capacity of 176TB (22TB per drive)'''.
:*Connect up to 8 SATA drives simultaneously, with a '''maximum total storage capacity of 176TB (22TB per drive)'''.
::<span class="tb_red">'''Note:''' Startup current reaches 16A with 8× 3.5" HDDs. DC power is not applicable; please use ATX power supply only.</span>
::<span class="tb_red">'''Note:''' Startup current reaches 16A with 8× 3.5" HDDs. DC power is not applicable; please use an ATX power supply only.</span>
:*Backward compatible with SATA 6G, 3G and 1.5G hard drives. It supports data transfer rates of 5.0, 3.0 and 1.5 Gbit/s.
:*Backward compatible with SATA 6G, 3G and 1.5G hard drives. It supports data transfer rates of 5.0, 3.0 and 1.5 Gbit/s.
:*Splitter Cable Included
:*Splitter Cable Included
::Comes with a power SATA splitter cable to support up to 8 drives
::Comes with a power SATA splitter cable to support up to 8 drives
|-
|-
| '''Multiple Peripheral Ports''' ||  
| '''Multiple Peripheral Ports''' ||
'''Compact form factor with rich ports and expandable peripherals.'''
'''Compact form factor with rich ports and expansion.'''
:*'''Dual Ethernet Ports for High-Performance Networking'''
:*'''Dual Ethernet Ports for High-Performance Networking'''
::Features one 1GbE Gigabit Ethernet port and one 2.5GbE port with a maximum speed of 2500Mbps.
::Features one 1GbE Gigabit Ethernet port and one 2.5GbE port with a maximum speed of 2500Mbps.

Latest revision as of 19:04, 26 June 2026

X1509 Packing List
X1509 with H519 Heansink
X1509 with X15-F10

Important Notes

  • The X1509 does not support system boot from SATA drives under the current CM5 firmware version.
  • The function, Automatic Drive Power Cut-off, only works with DC power input, not supported via the 4-pin ATX connector.
  • When 8× 3.5" HDDs are powered on simultaneously, the inrush current reaches 16A. DC power is not applicable; please use an ATX power supply only.
  • Over-voltage will permanently damage your hard drives! Please choose your power supply carefully.

Overview

  • This X1509 board supports 8 SATA ports, delivering a high-speed and high-capacity storage solution for Raspberry Pi CM5. It reaches a total storage capacity of up to 176TB (22TB per single drive).
  • Designed with a compact form factor, it is equipped with multiple peripheral ports for extensive expansion.
  • Built-in high-efficiency DC/DC step-down converter provides a stable 5V 12A output. A single power supply is sufficient to power both the CM5 module and all connected SATA storage devices.

Ideal for building home media centers, personal NAS systems and CCTV video storage servers.

Features

Compatibility
  • Fully compatible with all variants of Raspberry Pi Compute Module 5 (CM5).
RAM: 2GB, 4GB, 8GB, 16GB
eMMC: 0GB (Lite), 16GB, 32GB, 64GB
Wireless: both non‑wireless and wireless (Wi‑Fi/Bluetooth) models
  • Tested and supported operating systems:
Raspberry Pi OS (64-bit)
OpenMediaVault (OMV)
8 SATA Ports
  • Connect up to 8 SATA drives simultaneously, with a maximum total storage capacity of 176TB (22TB per drive).
Note: Startup current reaches 16A with 8× 3.5" HDDs. DC power is not applicable; please use an ATX power supply only.
  • Backward compatible with SATA 6G, 3G and 1.5G hard drives. It supports data transfer rates of 5.0, 3.0 and 1.5 Gbit/s.
  • Splitter Cable Included
Comes with a power SATA splitter cable to support up to 8 drives
Multiple Peripheral Ports

Compact form factor with rich ports and expansion.

  • Dual Ethernet Ports for High-Performance Networking
Features one 1GbE Gigabit Ethernet port and one 2.5GbE port with a maximum speed of 2500Mbps.
  • Dual HDMI 2.0 Ports
Supports dual 4K display output for multimedia playback and industrial applications.
  • Dual MIPI DSI/CSI-2 Connectors
22-pin FPC connectors (0.5mm pitch), fully compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display connection.
  • 12-Pin GPIO Header
Integrates general I/O ports, external power button and 12V PWM fan header, enabling DIY customization for enclosures and cooling systems.
  • MicroSD Card Slot
Works with Compute Module 5 Lite variants (models without onboard eMMC storage).
  • USB Connectors
USB-C: Dedicated for OS image loading on CM5 models with onboard eMMC.
USB2.0 Type-A & USB3.0 Type-A: For connecting external devices such as USB flash drives, keyboards and mice.
  • PWM Fan Connector
Used for active heat dissipation.
  • RTC Battery Connector
Keeps the system clock accurate even when the device is powered off.
  • Power Button
Controls power-on and power-off for both CM5 and connected SATA devices.
Built-in LED Indicators
  • HDD/SSD Status LED
Flashing: Data reading / writing
Solid On: Drive connected normally
Off: No drive detected
  • Power Indicator: Red LED
  • Activity Indicator: Green LED
Power Supply & Control
  • Built-in High-efficiency DC/DC Step-down Converters
Deliver stable 5V 12A output. One single power supply can power the CM5 module and all attached SATA drives simultaneously.
  • Automatic Drive Power Cut-off
Automatically cuts power to SATA devices when CM5 shuts down. This function only works with DC power input; it is not supported via the 4-pin ATX connector.
Dual Power Input

Input Voltage: 12V DC ± 5%

Warning: Over-voltage will permanently damage your hard drives!

  • Recommended power supply for DC jack:
For 8 × 2.5" SATA HDD/SSD: 12V 10A power adapter
For 4 × 3.5" SATA HDD: 12V 10A power adapter
  • Recommended power supply for 4-pin ATX connector: 12V 20A
  • Warning: Only one power source shall be connected at a time.
Notes

The X1509 does not support system boot from SATA drives under the current CM5 firmware version.

Test & Reviews

Test Conditions

Interface board details X1509 CM5 IO boards
Operation system Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: May 6th 2025) openmediavault 7.0
Storage details Samsung EVO 750 2.5" SATA SSD
Nework details Xiaomi WiFi7 router BE6500 2.5G Ethernet port

Performance Comparison:

  • 1G Ethernet vs. 2.5G Ethernet

Testing 2.5Gbps Ethernet on the Raspberry Pi CM5

  • Use iPerf Tool to Test Network Speed/Bandwidth, Getting max 2.36Gbps
  • Performance test for write speeds on an OpenMediaVault (OMV) shared folder
  • Performance test for read speeds on an OpenMediaVault (OMV) shared folder

Testing 1Gbps Ethernet on the Raspberry Pi CM5

  • Use iPerf Tool to Test Network Speed/Bandwidth, Getting max 961Mbps
  • Performance test for write speeds on an OpenMediaVault (OMV) shared folder
  • Performance test for read speeds on an OpenMediaVault (OMV) shared folder

Testing disk drive read speed with hdparm

Packing List

  • X1509 V1.1 CM5 8-port SATA IO board x1
  • SATA power spillter cable x1

User Manual

FAQ

Q1: Question 1

A: Place the answer here.

‎


Retrieved from "https://wiki.geekworm.com/index.php?title=X1509&oldid=37296"