1 Channel 30A Relay Module

12V 1 Channel Relay Module

12V 1 Channel Relay Module

Overview

• The module uses genuine high quality 30A relay, normally open interface maximum load: AC 250V / 30A, DC 30V / 30A.
• The module uses SMD optocoupler isolation, strong drive capability, stable performance, 5mA trigger current.
• There are 3 version: 5V, 12V, 24V as the difference of the working voltage.
• The module can be set high or low trigger by jumper cable.
• User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient to install.
• Module Size: 72mm x 40mm x 24mm (L x W x H)
• Product weight: 46g
• With 4 fixed bolt holes: hole diameter: 3.1mm, spacing: 44.5mm * 27.5mm.

Specification

• Working voltage: 12V
• Max working current: 80mAh
• Quiescent current: 5mAh
• Trigger current: 2-4mAh

Interface

• DC +: DC power supply positive;
• DC -: DC power supply module negative;
• IN: Signal input terminal(support High/Low Level switch freely);
• Normally open (NO): Relay normally open;
• Common terminal (COM): Relay common;
• Normally closed terminal (NC): relay normally closed terminal;