4K Splicer: Difference between revisions

(8 intermediate revisions by 3 users not shown)

Line 10:

Note:Only supports cutting into 2 horizontal left and right picture splicing, does not support up and down splicing.

LED Indicator: A continuous blinking green light indicates that the MCU is functioning normally.

'''Split Mode:''' Requires a 3840x1080 input signal. The device will split it to output two separate1920x1080 HDMI signals.

'''Copy Mode:''' Requires a 1920x1080 input signal. The device will duplicate it to output two identical 1920x1080 HDMI signals.

[[File:4K-Splicer.png]]

==Features==

* 1*HDMI2.0 (600MHz broadband) input, support HDCP1.4 and HDCP2.2

Line 16:

Line 25:

* Output Copy Mode: the output content of the two HDMI ports is exactly the same as the input content

* Switch: toggle split screen mode / copy mode（or control via serial port）

* Power requirements: ~~DC12V In~~

* Power requirements: DC 12V/1A input (Max. power consumption: 12V x 200mA)）

* Sound and picture are transmitted synchronously

==Packing List==

* 1 x 4K Spilcer

==FAQ==

'''Q1''': Is there a black screen after splitting the screen?

'''Answer:'''

The built-in program works like this: detect the width and height of the signal source resolution, output the height as it is, and divide the width in half from the middle without any stretching. That's all

In other words, whether there is a black screen depends entirely on whether your display device supports the resolution after splitting.

<~~comments~~ />

<comment-streams id="main" />

@@ Line 10: / Line 10: @@
 Note:Only supports cutting into 2 horizontal left and right picture splicing, does not support up and down splicing.
+LED Indicator: A continuous blinking green light indicates that the MCU is functioning normally.
+'''Split Mode:''' Requires a 3840x1080 input signal. The device will split it to output two separate1920x1080 HDMI signals.
+'''Copy Mode:''' Requires a 1920x1080 input signal. The device will duplicate it to output two identical 1920x1080 HDMI signals.
+[[File:4K-Splicer.png]]
 ==Features==
 * 1*HDMI2.0 (600MHz broadband) input, support HDCP1.4 and HDCP2.2
@@ Line 16: / Line 25: @@
 * Output Copy Mode: the output content of the two HDMI ports is exactly the same as the input content
 * Switch: toggle split screen mode / copy mode（or control via serial port）
-* Power requirements: DC12V In
+* Power requirements: DC 12V/1A input (Max. power consumption: 12V x 200mA)）
 * Sound and picture are transmitted synchronously
 ==Packing List==
 * 1 x 4K Spilcer
+==FAQ==
+'''Q1''': Is there a black screen after splitting the screen?
+'''Answer:'''
+The built-in program works like this: detect the width and height of the signal source resolution, output the height as it is, and divide the width in half from the middle without any stretching. That's all
+In other words, whether there is a black screen depends entirely on whether your display device supports the resolution after splitting.
 <!--Add review function! -->
-<comments />
+<comment-streams id="main" />
 <!--Please choose the  -->