X1017: Difference between revisions

(18 intermediate revisions by 2 users not shown)

Line 3:

*Never connect both DC power and ATX 4-pin power simultaneously: mixing these two power supply methods will directly burn out the expansion board and hard drive.

* Automatic Drive Power Cut-off: Supported with DC jack power input only. Not available when using ATX 4-pin connector.

* Warning: Over-voltage will damage your HDD. Please use a stable 12V power supply within the specified range.

* The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.

* The 4-pin functional fan connector only supports 12V PWM fans. Connecting a 5V fan will immediately burn it out.

* Do not apply power to your Raspberry Pi via the Type-C USB socket.

Line 20:

Line 18:

* '''Confusing power supply for multiple hard drives''':

Equipped with dual 12V power input options (two standard DC power jacks and one 4-pin ATX power connector), eliminating the need for separate power supplies for the Raspberry Pi.

A single power supply can easily ~~drive the~~ Raspberry Pi 5 and all connected SATA devices. A built-in load switch completely cuts off power to SATA devices when the system is shut down, while a high-efficiency buck converter provides a stable 5V 12A output.

One single power supply can easily run your Raspberry Pi 5 and all connected SATA storage devices. A built-in load switch completely cuts off power to SATA devices when the system is shut down, while a high-efficiency buck converter provides a stable 5V 12A output.

Supports simultaneous access to multiple hard drives and features a SATA 3.0 interface with bandwidth up to 5Gbps, ensuring fast and stable data transfer. Suitable for building home media centers, personal NAS, closed-circuit television video storage, and personal data backup servers.

Supports simultaneous access to multiple hard drives and features 8 SATA 3.0 interface with bandwidth up to 5Gbps, ensuring fast and stable data transfer. Suitable for building home media centers, personal NAS, closed-circuit television video storage, and personal data backup servers.

==Features==

Line 40:

Line 38:

* Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV)

* Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan

Note:The X1017 does not support SATA boot with the current Raspberry Pi5 firmware.

==Technical Specification==

{| class="wikitable"

|-

|'''Power input'''|| 12Vdc ± 5%(Warning: Over-voltage will damage your HDDs!)

|'''Power input'''||

Intput Ripple & Noise: 200mVp-p Max

* '''12Vdc ± 5%'''(Warning: Over-voltage will damage your HDDs!)

*Intput Ripple & Noise: 200mVp-p Max

|-

|'''Recommended power supply via DC jack'''||

* 8 x SATA 2.5" HDD/SSD : 12V 10A adapter x1

* 8 x SATA 2.5" HDD/SSD : '''12V 10A adapter x1'''

* 4 x SATA 3.5" HDD : 12V 10A adapter x1

* 4 x SATA 3.5" HDD : '''12V 10A adapter x1'''

* 8 x SATA 3.5" HDD : 12V 10A adapter x2

* 8 x SATA 3.5" HDD : '''12V 10A adapter x2'''

(two parallel DC jacks, can be used simultaneously)

|-

|'''Recommended power supply via 4-pin ATX connector'''|| 12V 20A

|'''Recommended power supply via 4-pin ATX connector'''||

* '''12V 20A'''

⚠️ CRITICAL WARNING: ~~Do NOT connect both DC power and ATX 4-pin power simultaneously. Mixing these two~~ power ~~methods will permanently destroy the board and~~ connected ~~devices~~.

⚠️ CRITICAL WARNING: Only one external power source should be connected at a time.

|-

Line 64:

Line 63:

|-

| '''Ports & Connectors''' ||

• 2 × DC 5.5×2.1mm power input jacks (parallel design)

* '''2 × DC 5.5×2.1mm power input jacks''' (parallel design)

• 1 × ATX 4-pin power ~~input~~ connector ~~(input only, no output)~~

* '''1 × ATX 4-pin power in/out connector '''

• 1 × 16-pin 0.5mm pitch PCIe FFC connector

* 1 × 16-pin 0.5mm pitch PCIe FFC connector

• 8 × 7-pin SATA 3.0 data connectors

* 8 × 7-pin SATA 3.0 data connectors

• 1 × 4-pin function header

* 1 × 4-pin function header

|-

| '''4-pin Function Header Pinout'''|| Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)

| '''4-pin Function Header Pinout'''||

* Pin1 = external momentary power switch

* Pin2 = fan PWM

* Pin3 = ground

* '''Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)'''

|-

| '''PCB Size''' || 100mm × 86mm

Line 118:

Line 121:

[[Category:Product Manual]]

[[Category:Raspberry pi]]

~~[[Category:Knowledge]]~~

~~[[Category:Orange Pi]]~~

~~[[Category:Arduino]]~~

~~[[Category:Consumer Electronics]]~~

~~[[Category:DIY Electronics]]~~

~~[[Category:ESP32]]~~

~~[[Category:Jetson Nano]]~~

~~[[Category:LattePanda]]~~

~~[[Category:Smart Home]]~~

@@ Line 3: / Line 3: @@
 <font color=red>
-*Never connect both DC power and ATX 4-pin power simultaneously: mixing these two power supply methods will directly burn out the expansion board and hard drive.
 * Automatic Drive Power Cut-off: Supported with DC jack power input only. Not available when using ATX 4-pin connector.
 * Warning: Over-voltage will damage your HDD. Please use a stable 12V power supply within the specified range.
 * The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
-* The 4-pin functional fan connector only supports 12V PWM fans. Connecting a 5V fan will immediately burn it out.
 * Do not apply power to your Raspberry Pi via the Type-C USB socket.</font>
@@ Line 20: / Line 18: @@
 * '''Confusing power supply for multiple hard drives''':
 Equipped with dual 12V power input options (two standard DC power jacks and one 4-pin ATX power connector), eliminating the need for separate power supplies for the Raspberry Pi.
-A single power supply can easily drive the Raspberry Pi 5 and all connected SATA devices. A built-in load switch completely cuts off power to SATA devices when the system is shut down, while a high-efficiency buck converter provides a stable 5V 12A output.
+One single power supply can easily run your Raspberry Pi 5 and all connected SATA storage devices. A built-in load switch completely cuts off power to SATA devices when the system is shut down, while a high-efficiency buck converter provides a stable 5V 12A output.
-Supports simultaneous access to multiple hard drives and features a SATA 3.0 interface with bandwidth up to 5Gbps, ensuring fast and stable data transfer. Suitable for building home media centers, personal NAS, closed-circuit television video storage, and personal data backup servers.
+Supports simultaneous access to multiple hard drives and features 8 SATA 3.0 interface with bandwidth up to 5Gbps, ensuring fast and stable data transfer. Suitable for building home media centers, personal NAS, closed-circuit television video storage, and personal data backup servers.
 ==Features==
@@ Line 40: / Line 38: @@
 * Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV)
 * Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan
+<font color=red>Note:The X1017 does not support SATA boot with the current Raspberry Pi5 firmware.</font>
 ==Technical Specification==
 {| class="wikitable"
 |-
-|'''Power input'''||  12Vdc ± 5%<font color=red>(Warning: Over-voltage will damage your HDDs!)</font>
+|'''Power input'''||
-Intput Ripple & Noise: 200mVp-p Max
+* '''12Vdc ± 5%'''<font color=red>(Warning: Over-voltage will damage your HDDs!)</font>
+*Intput Ripple & Noise: 200mVp-p Max
 |-
 |'''Recommended power supply via DC jack'''||
-* 8 x SATA 2.5" HDD/SSD : 12V 10A adapter x1
+* 8 x SATA 2.5" HDD/SSD : '''12V 10A adapter x1'''
-* 4 x SATA 3.5" HDD : 12V 10A adapter x1
+* 4 x SATA 3.5" HDD : '''12V 10A adapter x1'''
-* 8 x SATA 3.5" HDD : 12V 10A adapter x2
+* 8 x SATA 3.5" HDD : '''12V 10A adapter x2'''
 (two parallel DC jacks, can be used simultaneously)
 |-
-|'''Recommended power supply via 4-pin ATX connector'''||  12V 20A
+|'''Recommended power supply via 4-pin ATX connector'''||
+* '''12V 20A'''
-<font color=red>⚠️ CRITICAL WARNING: Do NOT connect both DC power and ATX 4-pin power simultaneously. Mixing these two power methods will permanently destroy the board and connected devices.</font>
+<font color=red>⚠️ CRITICAL WARNING: Only one external power source should be connected at a time.</font>
 |-
@@ Line 64: / Line 63: @@
 |-
 | '''Ports & Connectors''' ||
-• 2 × DC 5.5×2.1mm power input jacks (parallel design)
+*  '''2 × DC 5.5×2.1mm power input jacks''' (parallel design)
-• 1 × ATX 4-pin power input connector (input only, no output)
+*  '''1 × ATX 4-pin power in/out connector '''
-• 1 × 16-pin 0.5mm pitch PCIe FFC connector
+*  1 × 16-pin 0.5mm pitch PCIe FFC connector
-• 8 × 7-pin SATA 3.0 data connectors
+*  8 × 7-pin SATA 3.0 data connectors
-• 1 × 4-pin function header
+*  1 × 4-pin function header
 |-
-| '''4-pin Function Header Pinout'''|| Pin1 = external momentary power switch, Pin2 = fan PWM, Pin3 = ground, Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)
+| '''4-pin Function Header Pinout'''||
+* Pin1 = external momentary power switch
+* Pin2 = fan PWM
+* Pin3 = ground
+* '''Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)'''
 |-
 | '''PCB Size''' || 100mm × 86mm
@@ Line 118: / Line 121: @@
 [[Category:Product Manual]]
 [[Category:Raspberry pi]]
-[[Category:Knowledge]]
-[[Category:Orange Pi]]
-[[Category:Arduino]]
-[[Category:Consumer Electronics]]
-[[Category:DIY Electronics]]
-[[Category:ESP32]]
-[[Category:Jetson Nano]]
-[[Category:LattePanda]]
-[[Category:Smart Home]]
 <!--Please choose the  -->
 <!--Remove other categories, just keep the appropriate categories -->