-
X1017: Difference between revisions
Jump to navigation
Jump to search
No edit summary Tag: 2017 source edit |
|||
| (49 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{GD Template Impl}} | {{GD Template Impl}} | ||
==Important Notes== | ==Important Notes== | ||
<font color=red> | |||
* Automatic Drive Power Cut-off: Supported with DC jack power input only. Not available when using ATX 4-pin connector. | |||
* Warning: Over-voltage will damage your HDD. Please use a stable 12V power supply within the specified range. | |||
* The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware. | |||
* Do not apply power to your Raspberry Pi via the Type-C USB socket.</font> | |||
==Overview== | ==Overview== | ||
The X1017 is a PCIe 3.0 to 8-port SATA expansion board designed specifically for the Raspberry Pi 5, providing a one-stop solution for high-capacity, high-speed storage upgrades. | The X1017 is a PCIe 3.0 to 8-port SATA expansion board designed specifically for the Raspberry Pi 5, providing a one-stop solution for high-capacity, high-speed storage upgrades. | ||
It addresses two major pain points in building multi-disk storage systems with the Raspberry Pi 5: | It '''addresses two major pain points''' in building multi-disk storage systems with the Raspberry Pi 5: | ||
'''Insufficient native storage capacity''': Supports simultaneous connection of up to 8 SATA hard drives, with a maximum capacity of 22TB per drive and a total capacity of up to 176TB. | * '''Insufficient native storage capacity''': | ||
Supports simultaneous connection of up to 8 SATA hard drives, with a maximum capacity of 22TB per drive and a total capacity of up to 176TB. | |||
'''Confusing power supply for multiple hard drives''': Equipped with dual 12V power input options (two standard DC power jacks and one 4-pin ATX power connector), eliminating the need for separate power supplies for the Raspberry Pi. | * '''Confusing power supply for multiple hard drives''': | ||
Equipped with dual 12V power input options (two standard DC power jacks and one 4-pin ATX power connector), eliminating the need for separate power supplies for the Raspberry Pi. | |||
One single power supply can easily run your Raspberry Pi 5 and all connected SATA storage devices. A built-in load switch completely cuts off power to SATA devices when the system is shut down, while a high-efficiency buck converter provides a stable 5V 12A output. | |||
Supports simultaneous access to multiple hard drives and features | Supports simultaneous access to multiple hard drives and features 8 SATA 3.0 interface with bandwidth up to 5Gbps, ensuring fast and stable data transfer. Suitable for building home media centers, personal NAS, closed-circuit television video storage, and personal data backup servers. | ||
==Features== | ==Features== | ||
* 8 x SATA 3.0 Ports | * '''8 x SATA 3.0 Ports''' ： Connect up to eight SATA devices simultaneously to your Raspberry Pi 5 | ||
* High-Capacity Storage | * '''High-Capacity Storage''' ： Supports up to 176TB total capacity (22TB per drive). | ||
* Wide Drive Compatibility | * Wide Drive Compatibility ： Works with SATA 6G, 3G, and 1.5G hard drives | ||
* Multi-Speed Support | * Multi-Speed Support ： Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s | ||
* | * Easy to use ： Simple setup with LED indicators for drive status | ||
* Flexible Power Input | * Flexible Power Input ： Accepts 12V power via DC jack or ATX 4-pin connector | ||
* Unified Power Delivery | * '''Unified Power Delivery''' ： High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source | ||
* Pogo Pin Power to Pi 5 | * '''Pogo Pin Power to Pi 5''' ： Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed | ||
* Automatic Drive Power Cut-off | * '''Automatic Drive Power Cut-off''' ： Cuts power to SATA devices when Pi 5 shuts down '''(DC jack only; not supported with ATX 4-pin) ''' | ||
* Splitter Cable Included | * Splitter Cable Included ： Comes with a power SATA splitter cable to support up to 8 drives | ||
* HAT-Friendly Design | * '''HAT-Friendly Design''' ： Mounts on the bottom of the Pi 5, allowing you to use your favorite HATs alongside it | ||
* External Power Button Header | * External Power Button Header ： Easy DIY case integration | ||
* 12V PWM Fan Header | * '''12V PWM Fan Header'''： For custom case cooling solutions '''(⚠️ Only for 12V PWM fans; 5V fans will be damaged)''' | ||
* Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV) | * Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV) | ||
* Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan | * Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan | ||
<font color=red>Note:The X1017 does not support SATA boot with the current Raspberry Pi5 firmware.</font> | |||
==Technical Specification== | ==Technical Specification== | ||
{| class="wikitable" | |||
|- | |||
|'''Power input'''|| | |||
* '''12Vdc ± 5%'''<font color=red>(Warning: Over-voltage will damage your HDDs!)</font> | |||
*Intput Ripple & Noise: 200mVp-p Max | |||
|- | |||
|'''Recommended power supply via DC jack'''|| | |||
* 8 x SATA 2.5" HDD/SSD : '''12V 10A adapter x1''' | |||
* 4 x SATA 3.5" HDD : '''12V 10A adapter x1''' | |||
* 8 x SATA 3.5" HDD : '''12V 10A adapter x2''' | |||
(two parallel DC jacks, can be used simultaneously) | |||
|- | |||
|'''Recommended power supply via 4-pin ATX connector'''|| | |||
* '''12V 20A''' | |||
<font color=red>⚠️ CRITICAL WARNING: Only one external power source should be connected at a time.</font> | |||
|- | |||
| '''Raspberry Pi Power Supply''' || 5.1V ±5%, maximum 12A (output via spring pin) | |||
|- | |||
| '''Ports & Connectors''' || | |||
* '''2 × DC 5.5×2.1mm power input jacks''' (parallel design) | |||
* '''1 × ATX 4-pin power in/out connector ''' | |||
* 1 × 16-pin 0.5mm pitch PCIe FFC connector | |||
* 8 × 7-pin SATA 3.0 data connectors | |||
* 1 × 4-pin function header | |||
|- | |||
| '''4-pin Function Header Pinout'''|| | |||
* Pin1 = external momentary power switch | |||
* Pin2 = fan PWM | |||
* Pin3 = ground | |||
* '''Pin4 = 12V power output(⚠️ 12V ONLY, 5V devices will be destroyed)''' | |||
|- | |||
| '''PCB Size''' || 100mm × 86mm | |||
|- | |||
|'''PCIe cable length'''|| 37mm | |||
|} | |||
==Test & Reviews== | ==Test & Reviews== | ||
| Line 44: | Line 95: | ||
==Packing List== | ==Packing List== | ||
* X1017 V1.0 PCIe3.0 to 8-port SATA expansion board x1 | |||
* Screw M2.5x5mm x4 | |||
* PCIe FFC cable 37mm x2 | |||
* SATA power spillter cable x1 | |||
==User Manual== | ==User Manual== | ||
* Hardware | * X1017 hardware description:[https://suptronics.com/Raspberrypi/Storage/x1017-v1.0_hardware.html X1017 Hardware] | ||
* How to make it work: | * How to make it work:[https://suptronics.com/Raspberrypi/Storage/x1017-v1.0_software.html X1017 Software] | ||
==FAQ== | ==FAQ== | ||
| Line 66: | Line 121: | ||
[[Category:Product Manual]] | [[Category:Product Manual]] | ||
[[Category:Raspberry pi]] | [[Category:Raspberry pi]] | ||
<!--Please choose the --> | <!--Please choose the --> | ||
<!--Remove other categories, just keep the appropriate categories --> | <!--Remove other categories, just keep the appropriate categories --> | ||
Latest revision as of 16:20, 2 June 2026
Important Notes
- Automatic Drive Power Cut-off: Supported with DC jack power input only. Not available when using ATX 4-pin connector.
- Warning: Over-voltage will damage your HDD. Please use a stable 12V power supply within the specified range.
- The X1017 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
- Do not apply power to your Raspberry Pi via the Type-C USB socket.
Overview
The X1017 is a PCIe 3.0 to 8-port SATA expansion board designed specifically for the Raspberry Pi 5, providing a one-stop solution for high-capacity, high-speed storage upgrades.
It addresses two major pain points in building multi-disk storage systems with the Raspberry Pi 5:
- Insufficient native storage capacity:
Supports simultaneous connection of up to 8 SATA hard drives, with a maximum capacity of 22TB per drive and a total capacity of up to 176TB.
- Confusing power supply for multiple hard drives:
Equipped with dual 12V power input options (two standard DC power jacks and one 4-pin ATX power connector), eliminating the need for separate power supplies for the Raspberry Pi. One single power supply can easily run your Raspberry Pi 5 and all connected SATA storage devices. A built-in load switch completely cuts off power to SATA devices when the system is shut down, while a high-efficiency buck converter provides a stable 5V 12A output.
Supports simultaneous access to multiple hard drives and features 8 SATA 3.0 interface with bandwidth up to 5Gbps, ensuring fast and stable data transfer. Suitable for building home media centers, personal NAS, closed-circuit television video storage, and personal data backup servers.
Features
- 8 x SATA 3.0 Ports ： Connect up to eight SATA devices simultaneously to your Raspberry Pi 5
- High-Capacity Storage ： Supports up to 176TB total capacity (22TB per drive).
- Wide Drive Compatibility ： Works with SATA 6G, 3G, and 1.5G hard drives
- Multi-Speed Support ： Supports communication speeds of 5.0, 3.0, and 1.5 Gbit/s
- Easy to use ： Simple setup with LED indicators for drive status
- Flexible Power Input ： Accepts 12V power via DC jack or ATX 4-pin connector
- Unified Power Delivery ： High-efficiency DC/DC converter delivers up to 12A to power both Pi 5 and SATA drives from a single source
- Pogo Pin Power to Pi 5 ： Powers your Raspberry Pi 5 directly via pogo pins; no separate power supply needed
- Automatic Drive Power Cut-off ： Cuts power to SATA devices when Pi 5 shuts down (DC jack only; not supported with ATX 4-pin)
- Splitter Cable Included ： Comes with a power SATA splitter cable to support up to 8 drives
- HAT-Friendly Design ： Mounts on the bottom of the Pi 5, allowing you to use your favorite HATs alongside it
- External Power Button Header ： Easy DIY case integration
- 12V PWM Fan Header： For custom case cooling solutions (⚠️ Only for 12V PWM fans; 5V fans will be damaged)
- Tested and supported operating systems: Raspberry Pi OS (64-bit), OpenMediaVault (OMV)
- Compatible Accessories: PA12V10A power adapter, X15-F10 8010 PWM-controlled fan
Note:The X1017 does not support SATA boot with the current Raspberry Pi5 firmware.
Technical Specification
| Power input |
|
| Recommended power supply via DC jack |
(two parallel DC jacks, can be used simultaneously) |
| Recommended power supply via 4-pin ATX connector |
⚠️ CRITICAL WARNING: Only one external power source should be connected at a time. |
| Raspberry Pi Power Supply | 5.1V ±5%, maximum 12A (output via spring pin) |
| Ports & Connectors |
|
| 4-pin Function Header Pinout |
|
| PCB Size | 100mm × 86mm |
| PCIe cable length | 37mm
|
Test & Reviews
Test Conditions
- System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
- Interface board details: X1017 PCIe3.0 to 8-port SATA board
- Operation system: Raspberry Pi OS with desktop (Debian13 (trixie), 64bit, Release date: 4 Dec 2025)
- Storage details: Samsung EVO 750 2.5" SATA SSD
Testing disk drive read speed with hdparm
Packing List
- X1017 V1.0 PCIe3.0 to 8-port SATA expansion board x1
- Screw M2.5x5mm x4
- PCIe FFC cable 37mm x2
- SATA power spillter cable x1
User Manual
- X1017 hardware description:X1017 Hardware
- How to make it work:X1017 Software
FAQ
Q1: Question 1
A: Place the answer here.