X12-A1: Difference between revisions

← Older edit

VisualWikitext

@@ Line 1: / Line 1: @@
 {{GD Template Impl}}
+[[File:X12-A1-IMG-0394.jpg|thumb|right|X12-A1 V1.0]]
+[[File:X12-A1-IMG-0396-Interfaces-Dimensions.jpg|thumb|right|X12-A1 Interface]]
+[[File:X12-A1+X12-A3+X1209-Application-New.jpg|thumb|right|X12-A1 Application]]
+[[File:X12-A1-IMG-0396-Battery-Specifications-New.jpg|thumb|right|X12-A1 Battery Specifications]]
+==Safety Instructions & Warnings==
+{{UPS Safety Warning}}
 ==Overview==
-The X12-A1 is a 4-cell parallel 18650 battery holder designed to accommodate four 18650 batteries. Each battery is protected by a resettable ultra-low resistance fuse to prevent over-discharge. It features four XH2.54 connectors for easy integration with UPS HAT models such as the X1209 and X1203, and supports a stackable design, allowing for capacity expansion through multiple bases.
+The X12-A1 V1.0 is a stackable battery rack designed to expand the backup power of UPS HAT systems. It uses a parallel configuration of four 18650 batteries, providing plug-and-play battery capacity expansion for compatible UPS HAT systems such as the [[X1209]] (top-mounted) and [[X1203]] (bottom-mounted). Each battery has an independent ultra-low resistance resettable fuse to effectively prevent over-discharge risks; the four parallel XH2.54 connectors support convenient connection and multi-stand stacking, allowing for flexible increases in total power capacity as needed.
 ==Features==
@@ Line 13: / Line 22: @@
 * '''Stacking Design: '''Supports multiple stacks (requires the X12-A1 stacking kit), flexibly expanding total power capacity.
-* '''Compatible Models:''' X1209 UPS HAT (top-mounted Raspberry Pi), X1203 UPS HAT (bottom-mounted Raspberry Pi).
+* '''Compatible Models:''' [[X1209]] UPS HAT (top-mounted Raspberry Pi), [[X1203]] UPS HAT (bottom-mounted Raspberry Pi).
 *'''Core Application: '''The X12-A1 provides a backup battery expansion solution for the aforementioned UPS HATs.
@@ Line 19: / Line 28: @@
 ==Technical specification==
 {| class="wikitable"
 |-
-| '''Battery Model''' ||
+| '''Ports & Connectors''' ||
-(protection board required)
-|-
-| '''Battery Quantity''' ||
-cells in parallel
-|-
-| '''Output Interface''' ||
 XH2.54 2Pin parallel interface x 4
+-cell 18650 battery socket x1
 |-
-| '''PCB Dimensions''' ||
+| '''PCB Size''' ||
 .9mm x 77.1mm
@@ Line 35: / Line 41: @@
 ==Packing List==
-* '''X12-A1 Base Kit'''
--  X12-A1 18650 battery holder (4-cell parallel) x1
+* X12-A1 18650 battery holder (4-cell parallel) x1
--  2-pin 2.54mm pitch male-to-male cable AWG18 30cm x2
+* 2-pin 2.54mm pitch male-to-male cable AWG18 30cm x2
-* '''X12-A1 Stackable Kit - For use with X12-A1 base kit'''
+* 2-pin 2.54mm pitch male-to-male cable AWG 10cm x1
--  X12-A1 18650 battery holder (4-cell parallel) x1
--  2-pin 2.54mm pitch male-to-male cable AWG18 10cm x2
+* M2.5x22+6mm x4
--  Spacer M/F 22mm x4
+* M2.5x5mm x4
--  Screw M2.5x5mm  x4
+* M2.5mm nut x4
--  Screw nut M2.5  x4
+* X12-A3 Acrylic Plate x1
+* M2.5x6+3mm x8
+* M2.5x5mm x4
+[[File:X12-A1-IMG-0396-Packing-List+X12-A3.jpg|600px]]
 ==User Manual==
-* X12-A1 Hardware Guide:[https://suptronics.com/Raspberrypi/Power_mgmt/x12-a1-v1.0_hardware.html X12-A1 Hardware]
+* X12-A1 Hardware Guide: [https://suptronics.com/Raspberrypi/Power_mgmt/x12-a1-v1.0_hardware.html X12-A1 Hardware]
+[[File:X12-A1-X1203-Install-Guide.jpg|800px]]
+[[File:X12-A1-X1209-Install-Guide.jpg|800px]]
 ==FAQ==
@@ Line 68: / Line 80: @@
 <!--Add review function! -->
-<comments />
+<comment-streams id="main" />
 <!--Please choose the  -->
 <!--Remove other categories, just keep the appropriate categories -->
+[[Category:Product Manual]]
+[[Category:Raspberry pi]]